Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › BLIND SPOT MONITOR SYSTEM
NM38G0E _56 Audio / Visual / Telematics _102329 PARK ASSIST / MONITORING _0481985 BLIND SPOT MONITOR SYSTEM CO CONTROL F

PARK ASSIST / MONITORING  BLIND SPOT MONITOR SYSTEM  CONTROL  BLIND SPOT MONITOR CONTROL  


FUNCTION OF MAIN COMPONENTS


Component Function

*1: Models with RCTA function

*2: Models with multimedia system (for 12.3 inch display)

*3: Models with multimedia system (for 7 inch / 9 inch display)

*4: Models with multi-terrain monitor system

*5: Models with parking assist monitor system

Blind Spot Monitor Sensor LH/RH
·

Outputs radar waves from the blind spot monitor sensor to the blind spot sensor detection area, uses the reflected radar waves for detecting the presence of a vehicle, the vehicle-to-vehicle distance, and the relative speed, and then sends this information to the built-in signal processing circuit.

·

The signal processing circuit determines if a vehicle is present, and illuminates or blinks the outer rear view mirror indicator light accordingly.

·

Receives display dimmer signals from the main body ECU and dims the outer rear view mirror indicator light.


Outer Rear View Mirror Assembly LH/RH
·

Outer Rear View Mirror Indicator Light


·

Illuminates to inform the driver that a vehicle has been detected in the blind spot monitor sensor detection area.

·

Flashes to inform the driver when the turn signal switch is operated if a vehicle has been detected in the blind spot monitor sensor detection area.

·

Both indicator lights flash to inform the driver that a vehicle has been detected in the blind spot detection area while the driver is reversing.


RCTA Buzzer (No. 2 Clearance Warning Buzzer)*1 Sounds when a vehicle is detected in the blind spot monitor sensor detection area while the driver is reversing.
Combination Meter Assembly
·

BSM OFF Indicator

·

RCTA OFF Indicator

·

Multi-information Display

·

Meter Buzzer


·

Sends the turn light signal to the blind spot monitor sensor LH.

·

Sends the on/off signal of the BSM function and RCTA function*1 to the blind spot monitor sensor LH.

·

Sends the customization information signal of the BSM function and RCTA function*1 to the blind spot monitor sensor LH.

·

Illuminates the BSM OFF indicator to inform the driver when the BSM function is off.

·

Illuminates the RCTA OFF indicator to inform the driver when the RCTA function is off.*1

·

When a malfunction is detected in the blind spot monitor system or the blind spot monitor system determines that control is not possible, the BSM OFF indicator or RCTA OFF indicator*1 illuminates and a message is displayed on the multi-information display to warn the driver.


Multi-display Assembly*2 Receives visual signals from the parking assist ECU*4 or rear television camera assembly*5, and displays them.
Radio and Display Receiver Assembly*3
Parking Assist ECU*3 The RCTA icon is superimposed on the captured image. Then, the image is sent to the multi-display assembly*2 or radio and display receiver assembly*3.
Rear Television Camera Assembly*4
Steering Sensor
·

Sends the steering angle signal to the blind spot monitor sensor LH.

·

Sends the turn light signal to the combination meter assembly.


Turn Signal Switch Sends the turn light signal to the steering sensor.
Airbag ECU (Airbag ECU Assembly)
·

Yawrate Sensor


Sends yawrate information to the blind spot monitor sensor LH.
ECM Sends the shift position signal to the blind spot monitor sensor LH.
Brake Actuator Assembly
·

No. 2 Skid Control ECU


Sends the vehicle speed signal to the blind spot monitor sensor LH.
Main Body ECU (Multiplex Network Body ECU) Sends display dimmer signals to the blind spot monitor sensor LH.
Central Gateway ECU (Network Gateway ECU) Relays the signal between the CAN communication buses.
DLC3
·

The Global TechStream (GTS) can be connected to read the Diagnostic Trouble Codes (DTCs) of malfunctions.

·

The Global TechStream (GTS) can be connected to change settings as desired by the user.




OPERATING CONDITION


a.

The BSM function operates when all of the following conditions are met:

i.

The BSM function is on.


ii.

The shift position is other than R.


iii.

The vehicle speed is greater than approximately 16 km/h (10 mph).



b.

The RCTA function operates when all of the following conditions are met: (Models with RCTA function)

i.

The RCTA function is on.


ii.

The shift position is R.


iii.

The speed of this vehicle is less than approximately 15 km/h (9 mph).


iv.

The speed of the target vehicle is between approximately 8 km/h (5 mph) and 56 km/h (35 mph).




SYSTEM CONTROL


a.

BSM Function

i.

The BSM function can detect vehicles in its detection areas.

·

The detection areas formed by the blind spot monitor sensor LH and RH are as shown below.

Y212033C01
1.292,1.438 1.604,1.635 0.313,0.198 10 false *a 1.292,3.167 1.604,3.365 0.313,0.198 10 false *a 2.969,0.385 3.281,0.583 0.313,0.198 10 false *b 2.948,4.146 3.26,4.344 0.313,0.198 10 false *b 3.917,3.854 4.229,4.052 0.313,0.198 10 false *c 3.927,0.76 4.24,0.958 0.313,0.198 10 false *c 4.5,0.729 4.813,0.927 0.313,0.198 10 false *d 4.521,3.875 4.833,4.073 0.313,0.198 10 false *d 5.875,1.729 6.188,1.927 0.313,0.198 10 false *e 5.896,2.833 6.208,3.031 0.313,0.198 10 false *e
*a Approximately 3.0 m (9.8 ft.) *b Approximately 60 m (197 ft.)
*c Approximately 3.0 m (9.8 ft.) *d Approximately 1.0 m (3.3 ft.)
*e Approximately 0.5 m (1.6 ft.) - -
V100144

Detection Area (for Vehicle in Blind Spot)
V100145

Detection Area (for Rapidly Approaching Vehicle from Behind)


HINT:

If another vehicle that is rapidly approaching the vehicle's blind spot is detected, the notification timing is determined by the relative speed of the approaching vehicle. The notification timing for vehicles rapidly approaching the vehicle's blind spot can be customized. For details, refer to the Repair Manual.



Detection Area (for Vehicle in Blind Spot)
·

When this vehicle is overtaken by another vehicle in an adjacent lane.

Y212034C01
4.115,2.281 4.323,1.698 true 4.021,2.302 4.333,2.5 0.313,0.198 10 false *a
*a This Vehicle - -
V100135

Vehicle Speed (Fast)
V100136

Vehicle Speed (Slow)
V100144

Detection Area - -


·

When another vehicle enters the detection area of this vehicle due to a lane change.

Y212035C01
2.063,2.344 2.063,1.854 true 5.583,2.313 5.583,1.823 true 1.583,2.51 1.896,2.667 0.313,0.156 10 false *a 5.031,2.552 5.344,2.708 0.313,0.156 10 false *b 1.99,2.375 2.302,2.531 0.313,0.156 10 false *c 5.521,2.354 5.833,2.51 0.313,0.156 10 false *c
*a Another vehicle enters the detection area during lane change (merge in) (Type 1). *b Another vehicle enters the detection area during lane change (merge in) (Type 2).
*c This Vehicle - -
V100135

Motion Direction of This Vehicle
V100136

Motion Direction of Another Vehicle
V100144

Detection Area - -



Detection Area (for Rapidly Approaching Vehicle from Behind)
·

When another vehicle is rapidly approaching from behind.

Y212036C01
5.729,2.24 5.802,1.677 true 5.667,2.281 5.979,2.479 0.313,0.198 10 false *a
*a This Vehicle - -
V100135

Vehicle Speed (Fast)
V100136

Vehicle Speed (Slow)
V100145

Detection Area - -


·

When another vehicle enters the detection area of this vehicle due to a lane change and approaches this vehicle.

Y212037C01
5.5,2.354 5.49,1.896 true 5.479,4.354 5.469,3.896 true 3.26,2.208 3.573,2.365 0.313,0.156 10 false *a 3.188,4.292 3.5,4.448 0.313,0.156 10 false *b 5.417,4.396 5.729,4.552 0.313,0.156 10 false *c 5.448,2.406 5.76,2.563 0.313,0.156 10 false *c
*a Another vehicle enters the detection area during lane change (merge in) (Type 1). *b Another vehicle enters the detection area during lane change (merge in) (Type 2).
*c This Vehicle - -
V100135

Motion Direction of This Vehicle
V100136

Motion Direction of Another Vehicle
V100145

Detection Area - -




ii.

According to operation conditions, the BSM function promotes safety confirmation by using the outer rear view mirror indicator light to inform the driver that the system detects vehicles that are in or rapidly approaching the vehicle's blind spot.


iii.

The outer rear view mirror indicator light illuminates when a vehicle is in or rapidly approaching the vehicle's blind spot and the turn light switch is not operated. The indicator light flashes when a vehicle is in or rapidly approaching the vehicle's blind spot and the turn light switch is operated.



b.

RCTA Function (Models with RCTA Function)

i.

The RCTA function can detect vehicles in its detection areas.

·

The system continuously measures the relative speed of an approaching vehicle and its distance. If it is determined that the approaching vehicle will cross the path of this vehicle, the Estimated Crossing Time (ECT) is calculated. When the ECT is 2.5 seconds or less, the system alerts the driver by flashing the outer rear view mirror indicator lights and sounding the RCTA buzzer.

Y212038C01
3.938,1.052 4.24,0.49 true 0.833,2.073 0.74,1.281 true 2.74,2.083 2.646,1.292 true 4.26,0.313 4.573,0.469 0.313,0.156 10 false *a 2.563,1.104 2.875,1.26 0.313,0.156 10 false *b 0.635,1.094 0.948,1.25 0.313,0.156 10 false *c 3.406,2.615 3.719,2.771 0.313,0.156 10 false *d 2.417,3.083 2.729,3.24 0.313,0.156 10 false *e 2.948,2.531 3.26,2.688 0.313,0.156 10 false *f 1.042,3.115 1.354,3.271 0.313,0.156 10 false *f
*a This Vehicle *b Target Vehicle (Approximately 8 km/h (5 mph))
*c Target Vehicle (Approximately 56 km/h (35 mph)) *d Approximately 5.5 m (18.0 ft.)
*e Approximately 40 m (131.2 ft.) *f Target Detection Line
V100144

Detection Area - -


·

Normal Parking

Y212039C01
3.698,0.781 3.948,0.219 true 5.385,1.927 5.635,1.365 true 2.052,2.271 1.896,1.708 true 3.917,0.052 4.229,0.208 0.313,0.156 10 false *a 1.802,1.552 2.115,1.708 0.313,0.156 10 false *b 5.594,1.219 5.906,1.375 0.313,0.156 10 false *b
*a This Vehicle *b Target Vehicle
V100145

Detection Area - -




ii.

According to operation conditions, the RCTA function promotes safety confirmation by using the outer rear view mirror indicator lights and RCTA buzzer to inform the driver that another vehicle has entered the blind spot monitor sensor alert area of this vehicle.




FUNCTION


a.

Blind Spot Monitor System Operation

i.

The combination meter assembly customization setting can be used to turn the BSM function and RCTA function* on and off.


ii.

A BSM OFF indicator is located in the combination meter assembly to make it possible to check that the BSM function is off.


iii.

A RCTA OFF indicator is located in the combination meter assembly to make it possible to check that the RCTA function is off.*


iv.

The combination meter assembly customization setting can be used to change the brightness of the outer rear view mirror indicator light, volume of the RCTA buzzer* and the BSM function detection timing.

*: Models with RCTA function




b.

Customization Function

i.

Settings of some functions can be changed as desired by the user. Refer to the Repair Manual for details.




DIAGNOSIS


a.

In order to make system inspections easier to perform, a diagnosis function is used in consideration of serviceability. The DTCs of malfunctioning parts can be read by connecting the Global TechStream (GTS). Refer to the Repair Manual for details.