OUTLINE
The multi-terrain monitor system can switch between the multi-terrain monitor and panoramic view monitor according to the driving conditions.
The multi-terrain monitor is a system that uses images obtained from cameras installed to the front, rear, left and right sides of the vehicle, enabling the driver to confirm at a glance the condition of obstacles near the vehicle or near the tires during off-road driving.
A panoramic view monitor is provided which displays a panoramic view of the vehicle to assist the driver during parking and low speed driving. The panoramic image is created by seamlessly combining images from each television camera assembly installed to the front, rear, left and right sides of the vehicle.
The multi-terrain monitor provides a variety of image display modes to make confirming the area around the vehicle possible with off-road driving assistance such as checking for obstacles when driving forward or reversing, or checking for obstacles near the tires. These display modes include the simultaneous display of the dual side views and the front view, rear view, wide rear view or under vehicle terrain view.
The panoramic view monitor provides a variety of image display modes to make confirming the area around the vehicle possible according to driving conditions. These display modes include the simultaneous display of the panoramic view and the front view, rear view, wide rear view, side clearance view or cornering view.
This system uses the full-screen display on the 12.3-inch wide display to make it possible for the driver to easily confirm the surroundings and simultaneously confirm a wide range on a single screen.
The "side view and wide front view", "side view and rear view" and "side view and wide rear view" screens are provided. Even with the outer rear view mirrors retracted, the system helps the driver confirm the safety of the surroundings and park close to objects, etc.
Images from the front television camera assembly and the left and right side television camera assemblies are combined and a panoramic view and side clearance view looking down on the front side of the vehicle from behind are used, allowing the driver to intuitively confirm the space on the sides of the vehicle when passing another vehicle on a narrow road or when driving close to the sides of the road.
Images from a perspective diagonal from the rear of the vehicle are displayed to make it easier to confirm the rear inner wheel and surrounding area during turning. A panoramic view and cornering view is used to confirm catching due to inner wheel difference, confirm safety when turning right or left on narrow roads and help prevent hitting the curb when pulling onto a roadway.
The "under vehicle terrain view and dual side views" are used to display an image that combines lines indicating the current vehicle position and tire positions with a past image captured before the current vehicle position to help the driver understand information such as conditions under the vehicle and the front wheel positions.
The "under vehicle terrain view (rear wheel) and dual side views" are used to display an image that combines a current image with a past image captured before the current vehicle position as an image at the bottom of vehicle to help the driver confirm the rear wheel positions and the conditions under the vehicle.
A function, which automatically displays the panoramic view and wide front view screen when the Toyota parking assist-sensor detects a stationary object, is used.
The multi-terrain monitor is provided with a magnification function for enlarging the display of the under vehicle terrain view or front view screen, and the panoramic view monitor is provided with a magnification function for enlarging the display of either of 2 locations on the front and rear of the vehicle.
Do not rely solely upon the multi-terrain monitor system. As with unequipped models, drive carefully while directly confirming the safety of your surroundings.
| Display Mode | Display | Shift Position | Notes |
|---|---|---|---|
| Front View and Dual Side Views Mode |
|
Except R | Used to check the front and the sides of the vehicle at low speeds. |
| Under Vehicle Terrain View and Dual Side Views Mode |
|
Except R | Used to check the road surface under the floor and the sides at low speeds. |
| Under Vehicle Terrain View (Rear Wheel) and Dual Side Views Mode |
|
Except R | Used to check the rear wheels under the floor and the sides of the vehicle at low speeds. |
| Rear View and Dual Side Views Mode |
|
R | Used to check the rear and the sides of the vehicle at low speeds. |
| Wide Rear View and Dual Side Views Mode |
|
R | Used to check the rear and the sides of the vehicle at low speeds. |
| Wide Front View and Dual Side Views Mode (When The Outer Rear View Mirrors are Retracted) |
|
Except R | Used to check the sides and the front of the vehicle when the outer rear view mirrors are retracted. |
| Rear View and Dual Side Views Mode (When The Outer Rear View Mirrors are Retracted) |
|
R | Used to check the sides and the rear of the vehicle when the outer rear view mirrors are retracted. |
| Wide Rear View and Dual Side Views Mode (When The Outer Rear View Mirrors are Retracted) |
|
R | Used to check the sides and the rear of the vehicle when the outer rear view mirrors are retracted. |
The illustrations shown are example only. The illustrations may differ from the actual vehicle screens.
| Display Mode | Display | Shift Position | Notes |
|---|---|---|---|
| See Through View Mode |
|
P | Used to check the conditions around the vehicle from a first-person perspective when the vehicle is parked. |
| Moving View Mode |
|
P | Used to check the conditions around the vehicle from a third-person perspective when the vehicle is parked. |
| Panoramic View and Wide Front View Mode |
|
Except P or R | Used to check the conditions around and in front of the vehicle when driving at low speed. |
| Panoramic View and Side Clearance View Mode |
|
Except P or R | Used to check the conditions around and in front of the vehicle when driving at low speed. |
| Panoramic View and Cornering View Mode |
|
Except P or R | Used to check the area around the vehicle and the sides of the vehicle at low speed. |
| Panoramic View and Rear View Mode |
|
R | When backing up, this is used to check the conditions around and behind the vehicle. |
| Panoramic View and Wide Rear View Mode |
|
R | When backing up, this is used to check the conditions around and behind the vehicle. |
| Side View and Wide Front View Mode |
|
Except R | When the outer rear view mirrors are retracted, this is used to check the conditions around the dual side and in front of the vehicle. |
| Side View and Rear View Mode |
|
R | When the outer rear view mirrors are retracted, this is used to check the conditions around the dual side and behind the vehicle. |
| Side View and Wide Rear View Mode |
|
R | When the outer rear view mirrors are retracted, this is used to check the conditions around the dual side and behind the vehicle. |
MAIN FEATURES
The multi-terrain monitor uses the images captured by the front television camera assembly, rear television camera assembly and left and right side television camera assemblies to display an image that combines the current vehicle position and tire positions with a past image captured before the current vehicle position, and to display an image that combines a current image with a past image as an image at the bottom of vehicle. The system also simultaneously displays the dual side views and the front view, rear view, wide rear view or under vehicle terrain view on the multi-display assembly screen to help the driver in determining conditions in a wide range of situations, such as understanding the conditions during off-road driving or checking for obstacles when entering a garage.
The under vehicle terrain view helps the driver in operations such as checking conditions under the vehicle and understanding the front wheel positions by combining an image captured in the past with a current image to display the image as an underfloor transparent image at the bottom of the vehicle.
The front view helps the driver in operations such as checking conditions near the vehicle front and the travel direction of the vehicle.
The rear view and wide rear view help the driver reverse the vehicle.
The panoramic view monitor seamlessly combines images from the front, rear, left and right television camera assemblies and displays the combined images as the panoramic view image. Also, the system assists the driver to confirm the area around the vehicle while driving at low speeds and driving during parking by simultaneously displaying the panoramic view and front (wide front view) or rear (rear view and wide rear view) images, an overhead view of the front of the vehicle from the rear (side clearance view), an overhead view of the vehicle diagonally from the rear (cornering view), etc., on the multi-display assembly.
The front image (wide front view) helps the driver confirm whether it is safe to start off at locations with poor visibility, such as intersections and T-junctions.
The rear image (rear view and side rear view screen) helps the driver reverse the vehicle.
The overhead view of the front of the vehicle from the rear (side clearance view) helps the driver to confirm the safety of the areas to the sides of the vehicle, avoid contact with obstacles on narrow roads and drive close to the shoulder.
The overhead view of the vehicle diagonally from the rear (cornering view) helps the driver to confirm safety when turning right or left on narrow roads and prevent hitting the curb when pulling onto a roadway.
The multi-terrain monitor system is an auxiliary device used to confirm the area around the vehicle. Always drive while directly confirming the surroundings of the vehicle (particularly the area to the rear).
The see through view and moving view combines images from the cameras on the front, rear, and both sides of the vehicle into a simulated video display of the area surrounding the vehicle. By reducing the size of the blind spots from inside the vehicle, it assists in confirming the safety of the area around the vehicle.
The see through view and moving view screens can be displayed when the Toyota parking assist-sensor is on.
| *a | See Through View | *b | Moving View |
PRECAUTION
When driving, directly confirm the surroundings of the vehicle (particularly the area to the rear). Failure to do so can lead to unforeseen accidents, such as collisions with other vehicles, etc. Make sure to observe the following precautions when using the multi-terrain monitor system.
|
·
Never rely solely on the multi-terrain monitor. As with unequipped vehicles, drive carefully while directly confirming the safety of your surroundings and the area to the rear of the vehicle. Take particular care to avoid parked cars and other obstacles.
·
Due to the characteristics of the camera lens, the actual position and distance of people and other obstacles will differ from those shown on the multi-terrain monitor screen. Directly confirm the safety of your surroundings before driving.
·
Never drive while looking only at the screen as the image on the screen is different from actual conditions. If you are driving while looking only at the screen, you may hit a person or an object, resulting in an accident. When driving, be sure to check the vehicle's surroundings with your own eyes and the vehicle's mirrors.
·
In low temperatures, the screen may darken or the images may become faint. Images of moving objects in particular may distort or disappear from the screen. Therefore, make sure to drive carefully while directly visually confirming the safety of your surroundings. |
Do not use the multi-terrain monitor under the following situations.
|
·
Do not use the multi-terrain monitor in the following situations. The system may not operate properly, resulting in an unexpected accident.
-
When driving on an icy, snow-covered or otherwise slippery road surface
-
When using tire chains or a spare tire
-
When either front door or the back door is not completely closed
-
When driving on an uneven road, such as a hill
-
When tires or suspension parts other than those specified are equipped. When the tires are replaced, the position indicated by the guide lines displayed on the screen may differ.
-
When any aftermarket parts have been installed on the bumper area which is displayed by the camera |
Precautions for guide lines
| The tire position indicator lines and vehicle position indicator lines may differ from actual vehicle positions depending on the number of passengers, cargo weight, road grade, road surface conditions, brightness of the surrounding environment, etc. Always drive the vehicle while confirming the safety of your surroundings. |
Precautions for panoramic view monitor screen display
|
·
In the panoramic view, the system combines images taken from the front, back, left and right side cameras into a single image. There are limits to the range and content that can be displayed. Understand the characteristics of this system before using.
·
Image clarity may decline at the four corners of the panoramic view. However, this is not a malfunction, as these are the regions along the border of each camera image where the images are combined.
·
Depending on lighting conditions near each of the cameras, bright and dark patches may appear on the panoramic view.
·
The panoramic view display does not extend higher than the installation position and image capture range of each camera.
·
There are blind spots around the vehicle and there are regions that are not displayed in the panoramic view.
·
3-Dimensional objects displayed in wide front view or rear view may not be displayed in the panoramic view.
·
People and other 3-dimensional obstacles may appear differently when displayed in the panoramic view. (These differences include, among others, cases in which displayed objects appear to have fallen over, disappear near image processing areas, appear from image processing areas, or when the actual distance to an object differs from the displayed position.)
·
The panoramic view will not be properly displayed when either front door or the back door is open.
·
The vehicle icon displayed in the panoramic view is a computer generated image, and properties such as the color, shape and size will differ from the actual vehicle. Therefore, nearby 3-dimensional objects may appear to be touching the vehicle, and actual distances to 3-dimensional objects may differ from those displayed. |
Area displayed on screen
Dual side views, see trough view, moving view, side clearance view, cornering view and panoramic view
|
·
There are blind spots near the vehicle that cannot be displayed on the monitor. Even if no obstacles are displayed on the monitor, obstacles may be on the driving path and the vehicle may contact them. Always drive while directly confirming the safety of your surroundings.
·
Since images captured from the 4 television camera assemblies are edited and displayed on the see through view, moving view, side clearance view, cornering view and panoramic view screens based on flat roads, the images may be displayed as follows.
-
Solid objects appear to be laying down, longer and thinner, or larger.
-
Solid objects higher than the road surface appear farther than they actually are or are not displayed at all.
-
Tall objects appear from the seams of combined images.
·
The brightness of each television camera image may appear lighter or darker according to the lighting intensity.
·
Changes in the vehicle tilt or height due to the number of occupants, the loading of the vehicle and the fuel level may cause the displayed image to be displayed.
·
Display images and guide lines may not be displayed correctly when any door equipped with a camera is not fully closed.
·
The distance between the vehicle icon and the road condition/obstacle displayed on the see through view, moving view, side clearance view, cornering view and panoramic view screens may differ from the actual distance.
·
The image definition may be low in the areas where the images are combined. |
| *a | See Through View | *b | Moving View |
| *c | Cornering View | *d | Side Clearance View |
| *e | Panoramic View | *f | Obstacles in Blind Spot Area |
|
Blind Spot Area not Displayed on Monitor | - | - |
| *a | See Through View | *b | Moving View |
| *c | Cornering View | *d | Side Clearance View |
| *e | Panoramic View | *f | Obstacle |
| *a | Image Combination Area | - | - |
Wide front view, dual side views, rear view and wide rear view
|
·
The display area may differ depending on the vehicle and road conditions.
·
Since the display range of the television camera assembly is limited, objects near the bottom of the bumper cannot be displayed.
·
The distance displayed on the monitor differs from the actual distance.
·
Since each television camera assembly uses a special lens, the distance displayed on the monitor differs from the actual distance.
·
Objects positioned higher than the television camera assembly may not be displayed on the monitor. |
|
Obstacle Not Displayed | - | - |
|
Obstacle Not Displayed | - | - |
|
Obstacle Not Displayed | - | - |
Television camera assembly precautions
Make sure to follow the precautions below to ensure the multi-terrain monitor system operates normally.
|
·
Do not subject the camera to strong impacts by hitting it, throwing objects at it, etc. The installation position and angle of the camera may become misaligned.
·
The camera has a waterproof structure. Do not remove, disassemble or modify the camera.
·
When cleaning the camera lens, wash the camera with a large amount of water and wipe the lens with a wet soft cloth. Do not strongly rub the camera lens. Otherwise, the lens may get damaged and the camera may not be able to capture clear images.
·
The cover of the camera is made of resin. Do not apply organic solvents, wax, oil film remover, glass coating, etc. If the camera is contaminated, immediately wipe it off.
·
Do not subject the camera to sudden temperature changes such as by pouring hot water into the camera under cold weather.
·
When washing the vehicle with a high-pressure washer, do not spray water on the rear television camera assembly or surrounding area. High-pressure water can damage the camera. |
If the camera is hit, a malfunction may occur. Have the vehicle inspected by your dealer as soon as possible.
If dirt or foreign matter (such as water droplets, snow, mud, etc.) is adhering to the camera, it cannot transmit a clear image. In this case, flush it with a large quantity of water and wipe the camera lens clean with a soft and wet cloth.
Road condition precautions
Combined images and guide lines on the multi-terrain monitor system show the distance based on a flat road surface. Therefore, in the following conditions, the distance and traveling path indicated by the guide lines displayed on the monitor may slightly differ from the actual ones.
| *a | Steep Uphill Incline behind Vehicle | *b | Steep Downhill Incline behind Vehicle |
| *c | Vehicle Posture Changed by Passengers and Load | *d | Disparity |
If a steep uphill incline is behind the vehicle, an obstacle will appear to be further away than it actually is, as shown in the illustration below.
| *a | Screen Image in Case A | *b | Screen Image in Case B |
Precautions for 3-dimensional obstacles
Guide lines on the monitor are for flat surfaces (such as roads, etc.). When protruding solid objects (obstacles such as a truck rear deck) or solid objects located higher than the road surface (the bumper, etc.) are nearby, directly confirm the surroundings of the vehicle.
Since the estimated course lines of the panoramic view, side clearance view and cornering view screen are displayed based on a flat road surface, solid objects located higher than the road surface (such as the bumper, protruding wall, truck rear deck, etc.) may not be displayed on the monitor or their actual locations may not be judged. Even if a solid object is outside of the estimated course lines and appears as if it will not contact the vehicle, the object may actually be on the path and the vehicle may contact the object.
Since the estimated course lines of the rear view and wide rear view screens are displayed based on flat roads, the location of solid objects cannot be judged. Even if a truck rear deck is outside of the estimated course lines and appears as if it will not contact the vehicle, the rear deck may actually be protruding into the path and the vehicle may contact the rear deck.
The distance indication as shown on the screen varies between 3-dimensional objects such as a vehicle and objects on a flat plane such as the road surface. As shown in the following illustration, points A and C are actually vertically aligned and point B is farther away from them. However, the points are displayed in order of distance from the vehicle, A, B and C. Therefore, the vehicle will come into contact with the 3-dimensional object if it is backed up to point A on the screen.
Under vehicle terrain view precautions
Past images captured before the current position are displayed. Therefore, the screen may differ from actual conditions in the following situations.
When conditions changed such as when an object moved or entered the frame after the image was taken
Loose material like sand or snow has crumbled or shifted
An obstacle has moved
There is a puddle, tract of mud, etc., within the display range
The vehicle slips
In the following situations, actual tire positions and vehicle position may differ from those indicated by the tire position indicator lines and vehicle position indicator lines.
Tires have been replaced
Optional equipment has been
Rear camera detection (RCD) precautions (models with RCD function)
Situations in which the system may not operate properly
Some pedestrians, such as the following, may not be detected by the rear camera detection function, preventing the function from operating properly:
Pedestrians who are bending forward or squatting
Pedestrians who are lying down
Pedestrians who are running
Pedestrians who suddenly enter the detection area
People riding a bicycle, skateboard, or other light vehicle
Pedestrians wearing oversized clothing such as a rain coat, long skirt, etc., making their silhouette obscure
Pedestrians whose body is partially hidden by an object, such as a cart or umbrella
Pedestrians which are obscured by darkness, such as at night
In some situations, such as the following, pedestrians may not be detected by the rear camera detection function, preventing the function from operating properly:
When backing up in inclement weather (rain, snow, fog, etc.)
When the rear camera is obscured (dirt, snow, ice, etc. are attached) or scratched
When a very bright light, such as the sun, or the headlights of another vehicle, shines directly into the rear camera
When backing up in a place where the surrounding brightness changes suddenly, such as at the entrance or exit of a garage or underground parking lot
When backing up in a dim environment such as during dusk or in an underground parking lot
When the camera position and direction are deviated
When a towing hook is attached
When water droplets are flowing on the camera lens
When the vehicle height is extremely changed (nose up, nose down)
When tire chains or an emergency tire puncture repair kit are used
Situations in which the system may not operate properly
Even though there are no pedestrians in the detection area, some objects, such as the following, may be detected, possibly causing the rear camera detection function to operate.
Three dimensional objects, such as a pole, traffic cone, fence, or parked vehicle
Moving objects, such as a car or motorcycle
Objects moving toward your vehicle when backing up, such as flags or puddles (or airborne matter, such as smoke, steam, rain, or snow)
Cobblestone or gravel roads, tram rails, road repairs, white lines, pedestrian crossings or fallen leaves on the road
Metal covers (gratings), such as those used for drainage ditches
Objects reflected in a puddle or on a wet road surface
Shadows on the road
Even though there are no pedestrians in the detection area, some objects, such as the following, may be detected, possibly causing the rear camera detection function to operate.
When backing up toward the roadside or a bump on the road
When backing up toward an incline/decline
If the rear of the vehicle is raised or lowered due to the carried load
If the orientation of the rear camera has been changed
If a bumper protector, such as an additional trim strip, is installed to the rear bumper
If a towing eyelet is installed to the rear of the vehicle
When water is flowing over the rear camera lens
When the rear camera is obscured (dirt, snow, ice, etc. are attached) or scratched
If there is a flashing light in the detection area, such as the emergency flashers of another vehicle
When tire chains or an emergency tire puncture repair kit are used
Situations in which the rear camera detection function may be difficult to notice
The buzzer may be difficult to hear if the surrounding area is noisy, the volume of the audio system volume is high, the air conditioning system is being used, etc.
If the temperature in the cabin is extremely high or low, the Multimedia Display may not operate correctly.
Icon Display
The icon of the Toyota parking assist-sensor, Rear Crossing Traffic Alert (RCTA)*1 and Rear Camera Detection (RCD)*2 is displayed superimposed on a view captured by the camera. The icon may difficult to see depending on the brightness and color of the surroundings.
*1: Models with RCTA function
*2: Models with RCD function
| *A | Models with RCTA Function | *B | Models with RCD Function |
| *a | Toyota Parking Assist-sensor Icon | *b | RCTA Icon |
| *c | RCD Icon | - | - |