Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › MULTI-TERRAIN MONITOR SYSTEM
NM38G0E _56 Audio / Visual / Telematics _102329 PARK ASSIST / MONITORING _0481987 MULTI-TERRAIN MONITOR SYSTEM CO CONTROL F

PARK ASSIST / MONITORING  MULTI-TERRAIN MONITOR SYSTEM  CONTROL  REAR CAMERA DETECTION CONTROL  


FUNCTION OF MAIN COMPONENTS


Component Function
Blind Spot Monitor Sensor LH Sounds the RCD buzzer when a pedestrian detection signal is received from the rear television camera assembly.
Blind Spot Monitor Sensor RH Sends pedestrian detection signals from the rear television camera assembly to the blind spot monitor sensor LH.
Rear Television Camera Assembly Detects pedestrians behind the vehicle and sends a pedestrian detection display signal to the parking assist ECU.
RCD Buzzer (No. 2 Clearance Warning Buzzer) Sounds an alarm to notify the driver when a pedestrian is detected behind the vehicle.
Multi-display Assembly Displays detection information to notify the driver when a pedestrian is detected behind the vehicle.
Combination Meter Assembly
·

RCD OFF Indicator

·

Multi-information Display


·

Sends a RCD on/off signal to the rear television camera assembly.

·

Illuminates the RCD OFF indicator when RCD is off.

·

When a malfunction is detected in the rear television camera assembly or the rear television camera assembly determines that control is not possible, the RCD OFF Indicator illuminates and a message is displayed on the multi-information display to warn the driver.

·

Sends customization information to the rear television camera assembly.


Parking Assist ECU Receives pedestrian detection signals from the rear television camera assembly and outputs a video signal to the multi-display assembly.
Steering Sensor Sends a steering angle signal to the rear television camera assembly.
ECM Sends a shift position signal to the rear television camera assembly.
Brake Actuator Assembly
·

No. 2 Skid Control ECU


Sends a vehicle speed signal to the rear television camera assembly.
Central Gateway ECU (Network Gateway ECU) Relays the signal between the CAN communication buses.
DLC3
·

The Global TechStream (GTS) can be connected to read the Diagnostic Trouble Codes (DTCs) of malfunctions.

·

The Global TechStream (GTS) can be connected to change settings as desired by the user.




OPERATING CONDITION


a.

RCD operates when all of the following conditions are established.

·

Ignition switch is turned ON.

·

RCD is on.

·

The shift position is R.





SYSTEM CONTROL


a.

If a pedestrian is in the area behind the vehicle or if the rear television camera assembly detects that a pedestrian is approaching the vehicle from behind, the system urges caution from the driver by sounding the RCD buzzer and displaying information on the multi-display assembly, as shown below.

Y221875E02
2.667,2.583 2.156,1.292 2.156,1.292 1.833,1.292 true 2.354,3.052 2.104,1.958 2.104,1.958 1.854,1.958 true 3.542,2.542 3.667,2.708 0.125,0.167 10 true A 3.552,3.177 3.677,3.344 0.125,0.167 10 true B 3.573,4.406 3.698,4.573 0.125,0.167 10 true C 0.156,1.219 1.927,1.5 1.771,0.281 10 true Approximately 1 m (3.3 ft.) 0.104,1.854 1.875,2.135 1.771,0.281 10 true Approximately 3 m (9.8 ft.) 0.219,3.708 1.99,3.99 1.771,0.281 10 true Approximately 6 m (16.4 ft.)

Area Warning
Buzzer Icon Display on Multi-display
A Sounds repeatedly. Blinks 3 times then stays illuminated.
B When own vehicle is stopped: Sounds 3 times. Blinks 3 times then stays illuminated.
When own vehicle is moving: Sounds repeatedly.
C If own vehicle and pedestrian approach area A within a certain amount of time: Sounds repeatedly. If own vehicle and pedestrian approach area A within a certain amount of time: Sounds 3 times, then stays illuminated.


b.

If a pedestrian is detected in warning area A, a repeating alarm sounds, and then the icon blinks 3 times and stays illuminated to warn the driver.

Y221876E02
4.646,3.854 5.125,4.167 0.479,0.313 10 false Area A 0.625,1.24 1.823,1.583 1.198,0.344 10 false Sounds repeatedly 2.115,1.26 3.354,1.646 1.24,0.385 10 false Blinks 3 Times then Stays Illuminated.


c.

If a pedestrian is detected in warning area B and the driver's own vehicle is stopped, the buzzer sounds 3 times and then the icon blinks 3 times and stays illuminated to warn the driver.

Own Vehicle Stopped
Y221877E02
0.552,1.146 1.583,1.448 1.031,0.302 10 false Sounds 3 Times 2.01,1.177 3.281,1.625 1.271,0.448 10 false Blinks 3 Times then Stays Illuminated. 4.906,3.844 5.417,4.063 0.51,0.219 10 false Area B

Own Vehicle Moving
Y221878E02
4.833,3.875 5.375,4.052 0.542,0.177 10 false Area B 0.354,1.115 1.552,1.396 1.198,0.281 10 false Sounds repeatedly 1.906,1.135 3.146,1.51 1.24,0.375 10 false Blinks 3 Times then Stays Illuminated


d.

If a pedestrian is detected in warning area C or if the driver's own vehicle and the pedestrian approach area A within a certain amount of time, the buzzer sounds repeatedly, and then the icon blinks 3 times and stays illuminated to warn the driver.

Y221879E02
0.406,1.156 1.646,1.375 1.24,0.219 10 false Sounds repeatedly 1.885,1.146 3.125,1.51 1.24,0.365 10 false Blinks 3 Times then Stays Illuminated. 5.698,3.885 6.292,4.115 0.594,0.229 10 false Area C



FUNCTION


a.

RCD Operation

i.

The combination meter assembly customization setting can be used to turn RCD on and off.


ii.

A RCD OFF indicator is located in the combination meter assembly to make it possible to check whether RCD is on or off. When the RCD is off, the indicator light illuminates to indicate the operation status.


iii.

The combination meter assembly customization setting can be used to change the volume of the buzzer.



b.

RCD Buzzer

i.

The RCD buzzer is installed to the rear inside the vehicle. It notifies the driver of vehicles approaching from the rear or pedestrians walking behind.


ii.

Sounding of the RCD buzzer is controlled by the clearance warning ECU Assembly.

RCD Buzzer Specification
Item Specification
Operation Frequency [kHz] 2.0 +/- 0.04
Sound Pressure Level [dB]* 83 +10/-3

HINT:

*: This is the sound pressure level at a position 1 m (3.3 ft.) away from the buzzer itself, not the level where the driver would be sitting (where the sound would actually be heard).



iii.

RCD Buzzer Sounding

1.

When a vehicle is detected approaching from the rear or pedestrians walking behind, the RCD buzzer sounds as follows.

Y221983E04
0.823,1.26 1.156,1.406 0.333,0.146 10 false ON 0.823,2 1.156,2.146 0.333,0.146 10 false OFF 1.188,0.792 1.875,0.979 0.688,0.188 10 false 100 ms 2.76,2.292 3.448,2.479 0.688,0.188 10 false Cycle 4.385,2.302 5.073,2.49 0.688,0.188 10 false 300 ms 2.615,0.583 3.302,0.771 0.688,0.188 10 false 100 ms



iv.

Buzzer Sound Temporary Mute Function

1.

When the RCD buzzer is sounding, the warning buzzer can be temporarily muted by operating the steering pad switch assembly.

HINT:

Then, If the shift position is changed to R, the temporary mute function is automatically canceled.





c.

Customization Function

i.

Settings of some functions can be changed as desired by the user. Refer to the Repair Manual for details.




DIAGNOSIS


a.

In order to make system inspections easier to perform, a diagnosis function is used in consideration of serviceability. The DTCs of malfunctioning parts can be read by connecting the GTS. Refer to the Repair Manual for details.