Home › Engine / Hybrid System › F33A-FTV (LUBRICATION) › LUBRICATION SYSTEM › from 2021.07
NM38G0E _51 Engine / Hybrid System _106500 F33A-FTV LUBRICATION _0486911 LUBRICATION SYSTEM DE DETAILS F

F33A-FTV LUBRICATION  LUBRICATION SYSTEM  DETAILS  OIL PUMP  


CONSTRUCTION


a.

The oil pump assembly is operated by the chain.


b.

The oil pump assembly is connected to the crankshaft bearing cap sub-assembly resulting in a structure that helps prevent sound generated by the oil pump assembly from radiating outside, enhancing quietness.


c.

This oil pump assembly uses an internal relief method which circulates relief oil to the suction passage of the oil pump assembly. This aims to minimize oil level change in the oil pan sub-assembly, reduce friction, and reduce the air mixing rate in the oil.


d.

An oil pump rotor with a highly efficient shape is used to reduce friction.


e.

An 8 mm pitch bush chain is used in the oil pump chain, reducing weight, enhancing quietness and reducing friction.


f.

Resin materials with high friction reducing efficiency and wear resistance are used in the chain tensioner plate.

W148432C01
3.115,3.854 3.063,2.74 true 6.521,3.396 6.198,3.104 true 6.667,2.563 6.031,2.438 true 5.177,3.365 5.51,3.26 true 5.021,2.854 5.573,2.719 true 4.031,3.813 4.208,1.927 true 3.042,3.969 3.354,4.125 0.313,0.156 10 false *1 3.969,3.927 4.281,4.083 0.313,0.156 10 false *2 6.74,2.51 7.052,2.667 0.313,0.156 10 false *3 6.552,3.427 6.865,3.583 0.313,0.156 10 false *c 4.948,3.375 5.26,3.531 0.313,0.156 10 false *b 4.813,2.833 5.125,2.99 0.313,0.156 10 false *a
*1 Oil Pump Assembly *2 Crankshaft Bearing Cap Sub-assembly
*3 Oil Pump Rotor - -
*a From Oil Pump *b To Oil Cooler Assembly, Oil Filter Sub-assembly
*c From Oil Strainer - -
V100135

Oil Passage - -