OUTLINE
Front Differential
An SD22B or SD22BN type front differential is provided depending on the model.
A built-in actuator type differential lock mechanism is used for the SD22BN type front differential to achieve a size and weight reduction and ensure superior performance against water ingress and impacts from outside, ensuring river crossing performance and improving driving performance on rough roads.
A conical spring has been provided between the side gear and side washer on the differential to add preload, improving driving stability.
Rear Differential
A BD24C, BD24CN or BD24CT type rear differential is used.
A built-in actuator type differential lock mechanism is used for the BD24CN type rear differential to achieve a size and weight reduction and ensure superior performance against water ingress and impacts from outside, ensuring river crossing performance and improving driving performance on rough roads.
An BD24CT type rear differential with TORSEN* Limited Slip Differential (LSD) is used. By optimally distributing drive force in accordance with acceleration operation, a high level of traction performance, operability and driving stability have been achieved.
*: TORSEN is a registered trade mark of JTEKT Corporation.
SPECIFICATION
Front Differential
Models with 1GR-FE Engine
|
*1: Models without Differential Lock Mechanism *2: Models with Differential Lock Mechanism |
||
| Differential Type | SD22B*1 | SD22BN*2 |
| Differential Gear Ratio | 4.300 | ← |
| Ring Gear Size | 226.0mm (8.9 in.) | ← |
| Ring Gear No. of Gear Teeth | 43 | ← |
| Drive Pinion No. of Gear Teeth | 10 | ← |
| No. of Differential Pinion | 2 | 4 |
| Oil Capacity | 1.16 Liters (1.22 US qts, 1.02 Imp. qts) | 1.32 Liters (1.39 US qts, 1.16 Imp. qts) |
| Oil Type | Toyota Genuine Differential Gear Oil LT or Equivalent | ← |
| Oil Viscosity | SAE 75W-85 | ← |
| Oil Grade | API GL-5 | ← |
Models with V35A-FTS Engine and F33A-FTV Engine
|
*1: Models without Differential Lock Mechanism *2: Models with Differential Lock Mechanism |
||
| Differential Type | SD22B*1 | SD22BN*2 |
| Differential Gear Ratio | 3.307 | ← |
| Ring Gear Size | 226.0 mm (8.9 in.) | ← |
| Ring Gear No. of Gear Teeth | 43 | ← |
| Drive Pinion No. of Gear Teeth | 13 | ← |
| No. of Differential Pinion | 2 | 4 |
| Oil Capacity | 1.16 Liters (1.22 US qts, 1.02 Imp. qts) | 1.32 Liters (1.39 US qts, 1.16 Imp. qts) |
| Oil Type | Toyota Genuine Differential Gear Oil LT or Equivalent | ← |
| Oil Viscosity | SAE 75W-85 | ← |
| Oil Grade | API GL-5 | ← |
Rear Differential
Models with 1GR-FE Engine
|
*1: Models without Differential Lock Mechanism *2: Models with Differential Lock Mechanism |
||
| Differential Type | BD24C*1 | BD24CN*2 |
| Differential Gear Ratio | 4.300 | ← |
| Ring Gear Size | 246.0 mm (9.7 in.) | ← |
| Ring Gear No. of Gear Teeth | 43 | ← |
| Drive Pinion No. of Gear Teeth | 10 | ← |
| No. of Differential Pinion | 2 | 4 |
| Oil Capacity | 5.47 Liters (5.78 US qts, 4.81 Imp. qts) | 4.91 Liters (5.19 US qts, 4.32 Imp. qts) |
| Oil Type | Toyota Genuine Differential Gear Oil LT or Equivalent | ← |
| Oil Viscosity | SAE 75W-85 | ← |
| Oil Grade | API GL-5 | ← |
Models with V35A-FTS Engine and F33A-FTV Engine
|
*1: Models without Differential Lock Mechanism *2: Models with Differential Lock Mechanism *3: Models with TORSEN LSD |
|||
| Differential Type | BD24C*1 | BD24CN*2 | BD24CT*3 |
| Differential Gear Ratio | 3.307 | ← | ← |
| Ring Gear Size | 246.0 mm (9.7 in.) | ← | ← |
| Ring Gear No. of Gear Teeth | 43 | ← | ← |
| Drive Pinion No. of Gear Teeth | 13 | ← | ← |
| No. of Differential Pinion | 2 | 4 | 10 |
| Oil Capacity | 5.45 Liters (5.76 US qts, 4.80 Imp. qts) | 5.18 Liters (5.47 US qts, 4.56 Imp. qts) | 5.25 Liters (5.55 US qts, 4.62 Imp. qts) |
| Oil Type | Toyota Genuine Differential Gear Oil LT or Equivalent | ← | Toyota Genuine Differential Gear Oil LX or Equivalent |
| Oil Viscosity | SAE 75W-85 | ← | ← |
| Oil Grade | API GL-5 | ← | ← |
MAIN FEATURES
TORSEN LSD
The TORSEN LSD responds well to changes in the road surface when driving straight, thus ensuring straight-line stability.
The TORSEN LSD reacts to limit the torque difference between the left and right wheels, thus distributing the coast torque generated by engine braking from the inner wheel to the outer wheel when decelerating during turning. As a result, a yaw moment opposite to the direction of the turn is generated, thus ensuring vehicle stability.
The TORSEN LSD reduces drive torque sent to the inner wheel and distributes it to the outer wheel when the inner wheel is slipping during acceleration while turning. As a result, a yaw moment in the turning direction is generated, thus achieving a high level of traction performance and operability.
PRECAUTION
TORSEN LSD
Do not add drive torque with only one of the rear wheels on the ground or with one of the rear wheels spinning. The structure of the TORSEN LSD transmits drive torque to the stopped wheel, which may cause the vehicle to move suddenly without any warning. Also, the differential mechanism may suffer damage in the above situation, possibly leading to a malfunction.
For the left and right rear wheels, equip tires of the same type and size which have roughly similar amounts of wear.
The TORSEN LSD consists of a differential case, 10 planetary gears, 2 side gears and 3 thrust washers. The planetary gears are engaged in pairs, and each pair of planetary gears is engaged with one of the side gears. The planetary gears are supported by the holes provided in the differential case and structured to rotate while revolving around the side gear.
| *1 | Differential Case Housing | *2 | Side Washer |
| *3 | Planetary Gear RH | *4 | Shim |
| *5 | Differential Case Cap | *6 | Side Gear LH |
| *7 | Washer | *8 | Planetary Gear LH |
| *9 | Side Gear RH | - | - |
The TORSEN LSD conducts differential limiting using friction force generated mainly between the planetary gear and differential case and between the side gear and washer when a velocity difference occurs between the left and right wheels. The friction force is proportional to the differential input torque and is generated by the reaction force between the planetary gear and side gear.