Home › Vehicle Exterior › LIGHTING (EXT) › LIGHTING SYSTEM › from 2021.07
NM38G0E _59 Vehicle Exterior _102326 LIGHTING (EXT) _0473633 LIGHTING SYSTEM CO CONTROL F

LIGHTING (EXT)  LIGHTING SYSTEM  CONTROL  LIGHT AUTO TURN-OFF CONTROL  


FUNCTION OF MAIN COMPONENTS


Component Function

*1: Models with projector type headlight

*2: Models with reflector type headlight

*3: Models with front fog light

*4: Models with rear fog light

Headlight ECU Sub-assembly RH*1 Shuts down power to the headlights and clearance lights.
Headlight ECU Sub-assembly LH*1
LED Driver Module RH (Headlight LED ECU RH)*2 Shuts down power to the headlights and clearance lights.
LED Driver Module LH (Headlight LED ECU LH)*2
Semiconductor Power Integration ECU*3 Shuts down power to the front fog lights.
Power Distribution Box Assembly Shuts down power to the taillights, license plate lights and rear fog lights.*4
Turn Signal Switch Light Control Switch Outputs a light control switch position signal and transmits it to the steering sensor.
Main Body ECU (Multiplex Network Body ECU) Receives various signals and turns off the exterior lights.
Steering Sensor Sends the light control switch position signal to the main body ECU.
Front Door Courtesy Light Switch Assembly RH Detects whether a door is open or closed and sends the signal to the main body ECU.
Front Door Courtesy Light Switch Assembly LH
Rear Door Courtesy Light Switch Assembly RH
Rear Door Courtesy Light Switch Assembly LH
Front Door Lock with Motor Assembly RH Door Lock Position Switch Sends door lock/unlock condition signals to the main body ECU.
Front Door Lock with Motor Assembly LH Door Lock Position Switch
Rear Door Lock with Motor Assembly RH Door Lock Position Switch
Rear Door Lock with Motor Assembly LH Door Lock Position Switch
Certification ECU (Smart Key ECU Assembly)
·

Sends engine switch condition signals to the main body ECU.

·

Sends the door lock/unlock operation signal to the main body ECU.


Central Gateway ECU (Network Gateway ECU) Relays the signal between the CAN communication lines.


SYSTEM CONTROL


a.

The light auto turn-off system operates as follows:

Type A
Function Operation Condition
Headlights Auto Turn-off When all of the following conditions are met, the headlights automatically turn off:*
·

The ignition switch is turned from on (IG) to off.

·

The light control switch is in the TAIL or HEAD position.


Exterior Light Auto Turn-off When both of the following conditions are met, the exterior lights automatically turn off:*
·

The ignition switch is turned from on (IG) to off.

·

The light control switch is in the AUTO position.



HINT:

*: The light auto turn-off control function can be changed using the customization function. For details, refer to the Repair Manual.


Type B
Function Operation Condition
Driver Door-linked When all of the following conditions are met, the exterior lights automatically turn off:
·

The ignition switch is turned from on (IG) to off.

·

The taillight are on (light control switch is in the TAIL or AUTO position.)

·

The driver door is closed and then opened.


Delay When all of the following conditions are met, the exterior lights automatically turn off after 30 seconds:
·

The ignition switch is turned from on (IG) to off.

·

The headlights are on (light control switch is in the HEAD or AUTO position).

·

All doors are closed after any of the doors are opened.


Key-linked When the delay function is active and the following condition is met, the exterior lights turn off immediately:
·

All doors are locked.



Type C
Function Operation Condition
Exterior Light Auto Turn-off When the following conditions are met, the exterior lights automatically turn off:*
·

The ignition switch is turned from on (IG) to off.

·

The driver door is closed and then opened.



HINT:

*: The light auto turn-off control function can be changed using the customization function. For details, refer to the Repair Manual.