Home › Engine / Hybrid System › F33A-FTV (COOLING) › COOLING FAN SYSTEM › from 2021.07
NM38G0E _51 Engine / Hybrid System _106499 F33A-FTV COOLING _0487131 COOLING FAN SYSTEM CO CONTROL F

F33A-FTV COOLING  COOLING FAN SYSTEM  CONTROL  COOLING FAN CONTROL  


FUNCTION OF MAIN COMPONENTS


Component Function
ECM Sends control signals to the electronic control fan coupling.
Fluid Coupling Assembly Changes the fan speed based on signals from the ECM.
Diesel Engine Engine Coolant Temperature Sensor Detects the engine coolant temperature by means of an internal thermistor.
Crank Position Sensor Detects the engine speed and performs the cylinder identification.
Accelerator Pedal Rod with Sensor Assembly Detects the amount of pedal effort applied to the accelerator pedal.
No. 2 Skid Control ECU Sends vehicle speed signals to the ECM.
Air Conditioning Amplifier Assembly Sends the air conditioning operation status to the ECM.


FUNCTION


a.

The ECM controls the cooling fan speed based on the engine coolant temperature, air conditioning operation status, engine speed, accelerator pedal opening and vehicle speed.

i.

During high load

The coupling engagement ratio is increased to increase the fan speed and improve engine cooling performance.


ii.

During initial engine warm-up, light and medium load

Oil in the coupling is removed and the coupling engagement ratio is reduced to suppress fan co-rotation and improve quietness.


iii.

During request from air conditioning system

The coupling engagement ratio is increased to increase air flow to the condenser and maximize cooling performance.