CONSTRUCTION
The vortex chamber is composed of a timing chain cover and water pump gasket, and the water pump and thermostat case are integrated to reduce intake pressure loss and reduce size.
The rotor specification, pulley diameter and vortex chamber shape are optimized to increase efficiency and enhance cooling performance.
A water drain cock is provided on the lower end of the water pump to enhance draining serviceability.
| *1 | Water Drain Cock | *2 | Water Pump Pulley |
| *3 | Water Pump Gasket | *4 | Rotor |
| *5 | Timing Chain Cover Sub-assembly | *6 | Thermostat Case |
| *7 | Bearing | - | - |
| *a | Back Side View | *b | To Cylinder Block Sub-assembly |
| *c | Water Pump Cross Section | - | - |
|
Engine Coolant Flow | - | - |