Home › Engine / Hybrid System › F33A-FTV (FUEL) › FUEL SYSTEM › from 2021.07
NM38G0E _51 Engine / Hybrid System _106496 F33A-FTV FUEL _0487133 FUEL SYSTEM DE DETAILS F

F33A-FTV FUEL  FUEL SYSTEM  DETAILS  SUPPLY PUMP  


CONSTRUCTION


a.

An HP5D type injection or supply pump assembly is used.


b.

The injection or supply pump assembly consists of a camshaft, a plunger, a check valve a pre-stroke control valve and a feed pump.

W148437C01
2.677,0.792 2.906,0.521 true 0.958,1.302 0.656,0.938 true 2.958,1.875 2.667,1.813 true 1.927,1.344 1.75,0.698 true 3.073,2.323 2.313,1.833 true 1.854,1.438 1.083,0.76 true 3.354,1.604 3.063,1.542 true 2.396,3.281 1.875,1.938 true 0.5,0.802 0.813,0.958 0.313,0.156 10 false *1 3.125,2.292 3.438,2.448 0.313,0.156 10 false *a 1.625,0.49 1.938,0.646 0.313,0.156 10 false *b 3.469,1.573 3.781,1.729 0.313,0.156 10 false *d 3.052,1.844 3.365,2 0.313,0.156 10 false *c 4.885,3.635 5.042,3.781 0.156,0.146 10 false A 5.323,3.417 5.479,3.563 0.156,0.146 10 false B 0.927,0.594 1.24,0.75 0.313,0.156 10 false *e 2.948,0.365 3.26,0.521 0.313,0.156 10 false *1 2.396,3.354 2.708,3.51 0.313,0.156 10 false *d
*1 Pre-stroke Control Valve - -
*a To Exhaust Fuel Addition Injector and Pressurized Fuel Filter *b Fuel Return Port (to Fuel Tank)
*c Fuel Inlet Port (from Fuel Priming Pump Assembly) *d To Common-rail Assembly
*e From Pressurized Fuel Filter - -


Supply Pump Specifications
Type HP5D
Length A 160.1 mm (6.30 in.)
B 102.5 mm (4.04 in.)
Pre-stroke Control Valve 2
Plunger φ 6.5 mm x 2
Weight 5500 g (12.1 lb)



OPERATION


a.

When the cam rotates the roller is pushed up, and in turn the plunger is pushed upward as well. When the plunger is not pushed up by the cam, it is pushed back down by the spring.

W123656C01
0.656,0.396 0.844,0.677 true 2.229,1.302 1.656,1.49 true 2.021,1.771 1.646,1.917 true 2.01,2.229 1.656,2.229 true 2.135,2.448 1.667,2.677 true 2.052,3.031 1.635,3.24 true 0.51,0.25 0.833,0.427 0.323,0.177 10 false *1 1.49,1.417 1.802,1.573 0.313,0.156 10 false *2 1.49,1.833 1.802,1.99 0.313,0.156 10 false *3 1.49,2.146 1.802,2.302 0.313,0.156 10 false *4 1.479,2.594 1.792,2.75 0.313,0.156 10 false *5 1.479,3.135 1.792,3.292 0.313,0.156 10 false *6
*1 Pre-stroke Control Valve *2 Plunger
*3 Spring *4 Shoe
*5 Roller *6 Double Cam



b.

The ECM controls the closing timing of the pre-stroke control valve while the plunger is moving up in order to adjust the fuel supply volume. As a result, the fuel pressure in the common rail assembly is controlled to the target injection pressure.


c.

When the pre-stroke control valve is closed while the plunger is moving up, the fuel pressure increases. When the fuel pressure exceeds the common-rail pressure, fuel is supplied to the common rail assembly.


d.

When the closing timing of the pre-stroke control valve is delayed, the length of pressure-fed strokes will decrease, as well as the fuel discharge volume.

W123658C01
3.302,0.552 3.438,0.271 true 3.417,0.083 3.729,0.24 0.313,0.156 10 false *a
*a Return Fuel - -



e.

When the closing timing of the pre-stroke control valve is hastened, the length of pressure-fed strokes will increase, as well as the fuel discharge volume.


f.

When the pre-stroke control valve is closed while the plunger is moving up, the fuel pressure increases. When the fuel pressure exceeds the common-rail pressure, fuel is supplied to the common rail assembly.

W123657