Home › Engine / Hybrid System › F33A-FTV (ENGINE CONTROL) › ECD SYSTEM › from 2021.07
NM38G0E _51 Engine / Hybrid System _106494 F33A-FTV ENGINE CONTROL _0489393 ECD SYSTEM CO CONTROL F

F33A-FTV ENGINE CONTROL  ECD SYSTEM  CONTROL  DURING STARTING CONTROL  


FUNCTION


a.

The starting injection volume is determined by adjusting the basic injection volume in accordance with the starter on signals (on time), engine coolant temperature sensor signals and engine speed signals. When the engine is cold, the engine coolant temperature will be lower and the injection volume will be greater.

Injection Volume Control
W149221E02
0.344,0.427 0.719,0.76 0.375,0.333 10 false ECM 0.729,0.698 2.333,1.135 1.604,0.438 10 false Basic Injection Volume 1.135,2.229 2.104,2.792 0.969,0.563 10 false Correction 2.854,2.302 4.094,3.094 1.24,0.792 10 false Atmospheric Pressure Sensor 5.344,0.531 6.646,0.958 1.302,0.427 10 false Start Signal 4.844,1.469 6.688,1.927 1.844,0.458 10 false Diesel Engine Engine Coolant Temperature Sensor 5.083,2.813 6.771,3.271 1.688,0.458 10 false Crank Position Sensor


b.

To determine the starting injection timing, the target injection timing is corrected in accordance with the starter signals, engine coolant temperature and engine speed. When the engine coolant temperature is low, if the engine speed is high, the injection timing is advanced.

Injection Timing Control
W149222E02
0.354,0.177 0.719,0.563 0.365,0.385 10 false ECM 4.906,1.146 6.74,1.542 1.833,0.396 10 false Diesel Engine Engine Coolant Temperature Sensor 5.469,0.417 6.26,0.813 0.792,0.396 10 false Start Signal 0.948,0.781 1.969,1.573 1.021,0.792 10 false Target Injection Correction 5.156,2.063 6.656,2.448 1.5,0.385 10 false Crank Position Sensor