FUNCTION OF MAIN COMPONENTS
The main components of the engine control system are as follows:
| Component | Function | |
|---|---|---|
|
*1: Models with dual fuel tank *2: Models with EGR system *3: Models with catalyst support control *4: Models with UREA SCR system *5: Models with catalyst support control (without UREA SCR system) *6: Models without UREA SCR system |
||
| ECM | The ECM performs overall control of the engine control system to suit the operating conditions of the engine in accordance with the signals provided by the sensors. | |
| Crank Position Sensor | This sensor detects the engine speed and performs cylinder identification. | |
| Cam Position Sensor | This sensor performs cylinder identification. | |
| Fuel Pressure Sensor | This sensor, which built into the injector assembly, uses built-in semiconductors to detect the internal pressure of the injector assembly. | |
| Fuel Temperature Sensor | This sensor detects the fuel temperature in the injector assembly. | |
| Mass Air Flow Meter Sensor Sub-assembly | Mass Air Flow Meter | This sensor uses a built-in silicon chip to directly detect the intake air mass. |
| Intake Air Temperature Sensor | Detects the intake air temperature by means of an internal thermistor. | |
| Inlet Air Temperature Switch (for Intercooler Inlet Side) | This sensor detects the intake air temperature prior to passing through the intercooler assembly. | |
| Intake Air Temperature Switch (for Intercooler Outlet Side) | This sensor detects the intake air temperature after passing through the intercooler assembly. | |
| Diesel Throttle Body Assembly | Throttle Position Sensor | This sensor detects the diesel throttle valve opening angle. |
| Throttle Motor | Controls the throttle valve opening according to signals from the ECM. | |
| Diesel Turbo Turbo Pressure Sensor | This sensor uses built-in semiconductors to detect the No. 1 Intake Pipe pressure. | |
| Diesel Turbo Turbo Pressure Sensor (for 2nd Compressor Outlet Side) | This sensor uses built-in semiconductors to detect the No. 1 compressor outlet elbow pressure. | |
| Turbocharger Sub-assembly | Nozzle Vane Position Sensor | This sensor detects the nozzle vane position. |
| DC Motor | Controls the variable nozzle vane according to signals from the ECM. | |
| No. 2 Turbocharger Sub-assembly | Nozzle Vane Position Sensor | This sensor detects the nozzle vane position. |
| DC Motor | Controls the variable nozzle vane according to signals from the ECM. | |
| Actuator with Bracket Assembly | Controls the exhaust control valve based on signals from the ECM. | |
| Air By-pass Valve Assembly | Makes the intake air from the No. 2 turbocharger sub-assembly bypass to the upstream side of the turbocharger sub-assembly based on signals from the ECM. | |
| Intake Air Control Valve Assembly | Supplies or shuts off the intake air from the No. 2 turbocharger sub-assembly to the intercooler assembly based on signals from the ECM. | |
| Diesel Engine Engine Coolant Temperature Sensor | This sensor detects the engine coolant temperature by means of an internal thermistor. | |
| Engine Coolant Temperature Sensor (for Intercooler) | This sensor detects the intercooler coolant temperature by means of an internal thermistor. | |
| Glow Plug Controller | The glow plug controller controls the operating temperature and the length of time for which the current is applied to the glow plug assemblies in accordance with the ECM signal. | |
| Injector Assembly | The injector injects the fuel to the combustion chamber in accordance with the ECM signals. | |
| Common-rail Assembly (Bank 1) | Pressure Discharge Valve | Regulates the pre-stroke quantity according to signals from the ECM. |
| Injection or Supply Pump Assembly | Pre-stroke Control Valve Assembly (Bank 1) | The pressure discharge valve regulates the fuel pressure. |
| Pre-stroke Control Valve Assembly (Bank 2) | ||
| Fuel Pump with Filter Assembly*1 | Sends fuel to the jet pump. | |
| Electric EGR Control Valve Assembly*2 | EGR Valve Position Sensor | Detects the EGR valve position and sends signals to the ECM. |
| No. 2 EGR Valve Assembly*2 | No. 2 EGR Valve Position Sensor | Detects the No. 2 EGR valve position and sends signals to the ECM. |
| Electric Water Pump Assembly | Based on signals from the ECM, intercooler coolant is pressure-fed to the intercooler assembly, turbocharger sub-assembly, No. 2 turbocharger sub-assembly, UREA injector assembly and exhaust fuel addition injector assembly. | |
| Exhaust Gas Temperature Sensor*3 | Detects the temperature of the exhaust gas. | |
| No. 2 Exhaust Gas Temperature Sensor*3 | ||
| No. 3 Exhaust Gas Temperature Sensor*3 | ||
| No. 4 Exhaust Gas Temperature Sensor*4 | ||
| EGR Gas Temperature Sensor*2 | ||
| Air Fuel Ratio Sensor*5 | Detects the oxygen concentration in exhaust gas. | |
| Differential Pressure Sensor*3 | Detects the difference in pressure before and after the DPF*6 or SCR-DPF catalyst*4. | |
| Exhaust Fuel Addition Injector Assembly*3 | Adds fuel inside the exhaust pipe. | |
| No. 1 Nitrogen Oxides Sensor*4 |
·
Detects the oxygen concentration in exhaust gas.
·
Detects the concentration of NOx in the exhaust gas. |
|
| No. 2 Nitrogen Oxides Sensor*4 | Detects the concentration of NOx in the exhaust gas. | |
| UREA Pump Control ECU*4 | Controls the UREA SCR system based on various signals. | |
SYSTEM CONTROL
The engine control system has the following features. The ECM controls these systems:
| System | Outline |
|---|---|
|
*1: Models with dual fuel tank *2: Models with EGR system *3: Models with catalyst support control *4: Models with UREA SCR system *5: Operation may not be possible in certain situations |
|
| Fuel Injection Volume Control | Based on the signals received from the sensors, the ECM determines the fuel injection volume in accordance with the engine condition. |
| Fuel Injection Timing Control | Based on the signals received from the sensors, the ECM determines the fuel injection timing in accordance with the engine condition. |
| During Starting Control | To facilitate startability, the ECM optimally controls the injection volume and injection timing during starting. |
| Idle Speed Control | The ECM determines the idle speed in accordance with the engine condition, and controls the fuel injection volume in order to maintain the target idle speed. |
| Fuel Pressure Control | Based on the signals received from the sensors, the ECM controls fuel pressure using the pre-stroke control valve in accordance with engine operating conditions. |
| Pilot Injection Control | Based on the signals received from the sensors, the ECM determines pilot injection volume/timing and interval (between pilot injection and main injection) in accordance with the engine condition. |
| Glow Plug Control | The ECM controls the operating temperature and the length of time for which current is applied to the glow plug assemblies, in accordance with the engine coolant temperature. |
| Diesel Throttle Control |
·
Controls the diesel throttle valve opening angle in accordance with the engine condition.
·
Fully closes the diesel throttle valve in order to reduce vibrations when the engine is stopped. |
| Turbocharger Control | Based on the signals received from the sensors, the ECM controls the actuator in accordance with the engine condition. |
| intelligent-Accuracy Refinement Technology (i-ART) | Fuel injection is precisely controlled and self-diagnosis of the injector assembly is conducted based on signals from the fuel pressure and fuel temperature sensors built into each injector assembly. |
| Electric Water Pump Control | Controls the amount of intercooler coolant sent to the intercooler assembly, turbocharger sub-assembly, No. 2 turbocharger sub-assembly, UREA injector assembly and exhaust fuel addition injector assembly in accordance with the engine condition. |
| Fuel Pump Control*1 | The ECM operates the fuel pump to optimally control the transfer of the fuel in the fuel tank. |
| Exhaust Gas Recirculation (EGR) System*2 | Based on the signals received from the sensors, the ECM determines the EGR volume via the electric EGR control valve assembly and No. 2 EGR valve assembly in accordance with the engine condition. For details, see the EMISSION CONTROL SYSTEM section. |
| Catalyst Support Control*3 | Based on the signals received from the sensors, the ECM controls the exhaust fuel addition injector assembly to purify the Particulate Matter (PM). For details, see the EMISSION CONTROL SYSTEM section. |
| UREA Selective Catalytic Reduction (SCR) System*4 | The ECM operates the urea pump according to signals from various sensors to control the urea addition amount. The remaining amount of urea solution, whether urea solution needs to be refilled or not and the concentration of urea solution are determined based on signals from the urea solution level sensor and urea solution concentration sensor, and display signals are sent to the combination meter assembly. For details, see the EMISSION CONTROL SYSTEM section. |
| Air Conditioning Cut-off Control | By controlling the air conditioning compressor on or off in accordance with the engine condition, driveability is maintained. |
| Immobiliser System | Prohibits fuel injection if an attempt is made to start the engine with an invalid ignition key. |
| Drive Start Control | If an abnormal shift (R to D/M, D/M to R, N to R, P to D/M, P to R*5) is detected while accelerating, a warning is displayed in the combination meter assembly and engine output is reduced to limit the acceleration, helping to avoid a collision. |
| Brake Override System | The engine output is restricted when both the accelerator and brake pedals are depressed. (For the Activation Conditions and Inspection Method, refer to the repair manual.) |
| Diagnosis | When the ECM detects a malfunction, it diagnoses and memorizes the failed section. |
| Fail-safe | When the ECM detects a malfunction, it stops or controls the engine in accordance with the data already stored in the memory. |