CONSTRUCTION
A beehive shape that narrows the upper part of the valve spring is used to reduce inertial mass. As a result, the load on the valve spring and friction are reduced.
An oil pressure type valve lash adjuster assembly is used to make valve clearance adjustment unnecessary in consideration of serviceability.
The valve spring retainer diameter is reduced, reducing inertial mass and friction.
A hat shaped valve stem oil seal is used to improve reliability.
The shaft diameter of the intake valve and exhaust valve is shortened to reduce weight, reducing friction.
| *1 | Camshaft Timing Sprocket | *2 | No. 2 Camshaft Timing Sprocket Assembly |
| *3 | Intake Camshaft Sub-assembly LH | *4 | Exhaust Camshaft Sub-assembly LH |
| *5 | Intake Valve | *6 | Exhaust Valve |
| *7 | Intake Valve Compression Spring | *8 | Exhaust Valve Compression Spring |
| *9 | Exhaust Camshaft Sub-assembly RH | *10 | Intake Camshaft Sub-assembly RH |
| *11 | No. 1 Valve Rocker Arm Sub-assembly | *12 | Valve Stem Cap |
| *13 | Valve Spring Retainer Lock | *14 | Valve Spring Retainer |
| *15 | Intake (Exhaust) Valve Stem Oil Seal | *16 | Valve Lash Adjuster Assembly |