CONSTRUCTION
High-strength special carbon steel is used for the crankshaft and induction hardening is performed for the fillets of the crankshaft pin and crankshaft journal to ensure high strength.
A split pin structure is used to reduce size.
A rear crankshaft balancer weight separate from the crankshaft is used to reduce weight and improve quietness.
An aluminum alloy and resin overlay are used for the crankshaft bearing to improve reliability against seizure and extend the lifespan.
The sliding surface shape of the crankshaft bearing is optimized to improve reliability.
A resin overlay is used on the sliding surface of the upper crankshaft thrust washer to reduce sliding resistance.
| *1 | Crankshaft | *2 | No. 1 or No. 2 Crankshaft Bearing |
| *3 | No. 3 or No. 4 Crankshaft Bearing | *4 | Upper Crankshaft Thrust Washer |
| *5 | Rear Crankshaft Balancer Weight | - | - |
| *a | fillet | *b | Oil Groove |
| *c | Resin Overlay | - | - |