CONSTRUCTION
A balanceshaft driven by the crankshaft is used to reduce noise.
A balanceshaft with a split structure is used to optimally position the No. 2 balanceshaft and rear balanceshaft weight, contributing to size reduction.
A tapered surface is used at the fastening part of the No. 1 balanceshaft sub-assembly and No. 1 balanceshaft driven gear to reduce the gear backlash and noise.
| *1 | No. 1 Balanceshaft Sub-assembly | *2 | No. 2 Balanceshaft |
| *3 | Crankshaft | *4 | Rear Balanceshaft Weight |
| *5 | No.1 Balanceshaft Driven Gear | - | - |