OUTLINE
A V6 2 way twin turbo F33A-FTV (3.3 L) engine is used to achieve a higher dimension of balance between fuel efficiency, high performance and quietness.
A Direct injection 4 stroke diesel engine (D-4D) system is used to reduce emissions and improve quietness.
The high-efficiency intake port shape and combustion chamber shape are optimized to both improve fuel efficiency and achieve high engine output. Also, Premixed Charge Compression Ignition (PCCI) and Diesel Staggered Premixed Ignition with Accelerated oxidation (D-SPIA) that utilizes divided combustion in proximity to the main injection are used to reduce emissions and improve fuel efficiency and quietness.
2-way twin turbo is used to switch the turbo in the low-speed range and high-speed range to obtain the optimal turbocharging performance in all speed ranges.
SPECIFICATION
| Engine Type | F33A-FTV | ||
|---|---|---|---|
| w/ Variable Nozzle Vane Type 2 Way Twin Turbocharger | |||
| w/ Solenoid Type Injector | |||
|
*1: Models with catalyst support control (except destination package for Russia) *2: Models with catalyst support control (destination package for Russia) *3: Models without catalyst support control *4: Models with catalyst support control *5: Emission regulations differ by country and region. *6: Weight shows the figure with oil and water fully filled. *7: Varies depending on the vehicle specification. |
|||
| No. of Cyls. and Arrangement | 6-cylinder, V-type | ||
| Valve Mechanism | 24-valve DOHC, Chain Drive | ||
| Combustion Chamber | Direct Injection Type | ||
| Manifolds | Cross-flow | ||
| Fuel System | Common-rail Type | ||
| Displacement | 3346 cm3 (204.2 cu. in.) | ||
| Bore x Stroke | 86.0 mm x 96.0 mm (3.39 in. x 3.78 in.) | ||
| Compression Ratio | 15.4 : 1 | ||
| Max. Output [NET] | 227 kW @ 4000 rpm*1 220 kW @ 3600 to 4200 rpm*2 225 kW @ 4000 rpm*3 |
||
| Max. Torque [NET] | 700 N*m @ 1600 to 2600 rpm | ||
| Valve Timing | Intake | Open | 5.5°BTDC |
| Closed | 38.5°ABDC | ||
| Exhaust | Open | 24°BBDC | |
| Closed | 2°ATDC | ||
| Firing Order | 1 - 2 - 3 - 4 - 5 - 6 | ||
| Fuel Cetane Number | 44 or higher*3 | ||
| 48 or higher*4 | |||
| Emission Regulation*5 | - | ||
| EURO 2 | |||
| EURO 4 | |||
| EURO 3 | |||
| EURO 5 | |||
| Bharat Stage 6 (BS 6) | |||
| Engine Service Mass (Reference)*6 | 265.7 kg*7 | ||
MAIN FEATURES
This engine is able to achieve the following through the use of the items listed below:
(1) High performance and fuel economy
(2) Low noise and vibration
(3) Lightweight and compact design
(4) Good serviceability
(5) Clean emissions
| Item | (1) | (2) | (3) | (4) | (5) |
|---|---|---|---|---|---|
|
*1: Models with EGR system *2: Models with catalyst support control (without UREA SCR system) *3: Models with UREA SCR system |
|||||
| A die cast cylinder head cover is used. | - | - | ○ | - | - |
| An oil separator assembly is used. | - | - | - | - | ○ |
| A cylinder head with an integrated exhaust manifold is used. | ○ | - | - | - | - |
| A tangential port and a helical port are used on the intake port. | ○ | - | - | - | ○ |
| A cylinder block made for FCV is used. | - | - | - | ○ | - |
| A half skirt structure and bearing beam structure are used. | ○ | ○ | ○ | - | - |
| A piston with combustion chamber made of steel is used. | ○ | - | ○ | ○ | ○ |
| A diagonally split cracking connecting rod is used. | ○ | ○ | ○ | ○ | - |
| A split pin crankshaft is used. | ○ | ○ | ○ | ○ | - |
| A hollow cast camshaft is used. | - | - | ○ | - | - |
| A timing chain and a chain tensioner are used. | - | ○ | - | ○ | - |
| Valve lash adjuster assemblies are used. | - | ○ | - | ○ | - |
| Valve rocker arm sub-assemblies are used. | ○ | ○ | ○ | ○ | - |
| Toyota Genuine Super Long Life Coolant (SLLC) is used. | - | - | - | ○ | - |
| A serpentine belt drive system is used. | - | - | ○ | ○ | - |
| A diesel throttle valve is used. | ○ | ○ | - | - | ○ |
| An intake manifold made of resin is used. | - | - | ○ | - | - |
| A variable nozzle vane type of 2-way twin turbocharger is used. | ○ | - | - | - | ○ |
| A water-cooled type intercooler assembly is used. | ○ | - | - | ○ | ○ |
| An HP5D type injection or supply pump assembly is used. | ○ | ○ | - | ○ | ○ |
| A common-rail type fuel injection system is used. | ○ | ○ | - | ○ | ○ |
| A solenoid valve type of injector assembly is used. | ○ | ○ | - | ○ | ○ |
| A mass air flow meter sub-assembly is used. | ○ | - | - | - | ○ |
| A pilot injection control system is used. | - | ○ | - | - | ○ |
| An electronically controlled fluid coupling assembly is used. | ○ | ○ | - | - | - |
| An Exhaust Gas Reduction (EGR) system is used.*1 | - | - | - | - | ○ |
| An EGR cooler is used.*1 | ○ | - | - | - | ○ |
| A DC motor drive No. 2 EGR valve assembly is used.*1 | ○ | - | - | - | ○ |
| An oxidation catalyst is used.*1 | - | - | - | - | ○ |
| A Diesel Particulate Filter (DPF) catalyst is used.*2 | - | - | - | - | ○ |
| An UREA Selective Catalytic Reduction (SCR) system is used.*3 | - | - | - | - | ○ |
| An SCR-DPF catalyst is used.*3 | - | - | - | - | ○ |
| An SCR catalyst is used.*3 | - | - | - | - | ○ |