CONSTRUCTION
A piston provided with a combustion chamber is used.
A piston made of steel is used to achieve high strength and low friction, and also reduce weight.
The compression height of the piston is reduced and the piston pin is shortened to reduce weight
The combustion chamber shape of the piston is optimized to slow down the flow of combustion gas and reduce cooling loss. As a result, fuel efficiency is improved.
A DLC coating is used on the outer circumference surface of the piston pin to prevent seizure and reduce friction.
The tension of the piston ring is reduced to reduce friction.
The cross section coefficient and contact width of the piston ring are reduced to improve its tracking of the cylinder bore and reduce oil consumption.
The pitch of the oil drain hole of the oil expander ring is shortened to improve oil drainage and reduce oil consumption.
| *1 | Piston | *2 | Piston Pin |
| *3 | No. 1 Compression Ring | *4 | No. 2 Compression Ring |
| *5 | Oil Expander Ring | - | - |
| *a | Compression Height | *b | DLC Coating |