CONSTRUCTION
A front exhaust pipe sub-assembly*1, No. 2 front exhaust pipe sub-assembly*1, front exhaust pipe assembly*2, center exhaust pipe assembly and tail exhaust pipe assembly made of stainless steel are used to reduce weight and improve rust resistance.
Ball joint is used to connect the center exhaust pipe and tail exhaust pipe, to dampen the transmission of exhaust pipe vibration from the engine idling range to the lock-up range (engine speed from 600 rpm to 1200 rpm) and improve vehicle quietness.*1
*1: Models with catalyst support control
*2: Models without catalyst support control
| *1 | Front Exhaust Pipe Sub-assembly | *2 | No. 2 Front Exhaust Pipe Sub-assembly |
| *3 | Center Exhaust Pipe Assembly | *4 | Tail Exhaust Pipe Assembly |
| *5 | Gasket | - | - |
| *a | SCR-DPF Catalyst | *b | SCR Catalyst |
| *c | Ball Joint | *d | Front |
| *e | Main Muffler | *f | Sub Muffler |
| *1 | Front Exhaust Pipe Sub-assembly | *2 | No. 2 Front Exhaust Pipe Sub-assembly |
| *3 | Center Exhaust Pipe Assembly | *4 | Tail Exhaust Pipe Assembly |
| *5 | Gasket | - | - |
| *a | DPF Catalyst | *b | Ball Joint |
| *c | Front | *d | Main Muffler |
| *e | Sub Muffler | - | - |
| *1 | Front Exhaust Pipe Assembly | *2 | Center Exhaust Pipe Assembly |
| *3 | Tail Exhaust Pipe Assembly | - | - |
| *a | Main Muffler | - | - |