OUTLINE
An AJA0F 10-speed automatic transmission (direct shift-10AT) is used.
A lightweight, compact and highly efficient 10-speed gear train is used.
A wide range of gear ratios is used, dramatically improving start-off acceleration performance by using a low gear ratio for the 1st gear and fuel economy at high speeds by using a high gear ratio for the 10th gear. Also, a close gear ratio is used for the low gear positions to achieve rhythmical gear changes. Furthermore, the transmission constantly selects the optimal gear ratio to achieve improved fuel economy in situations such as city driving.
The gear train is composed of 3 planetary gears. Also, the gear train uses a 2-stage clutch mechanism and aluminum parts, achieving weight reduction and compactness. As a result, superior packaging is also ensured.
An oil level detection mechanism (overflow method) is used. For details of fluid filling and adjustment procedures, refer to the Repair Manual.
Due to the use of stop and start control, an oil pump with motor assembly is installed in the transmission valve body assembly. When the engine is restarted after an idling stop is performed by stop and start control, the oil pressure required for the clutch and brake engagement is supplied to make smooth starting off possible. For details, see the Idling Stop Control section.*
*: Models with stop and start system
SPECIFICATION
Automatic Transmission Assembly
|
*1: Models with V35A-FTS engine *2: Models with F33A-FTV engine *3: Weight shows the figure with the fluid fully filled. |
||
| Gear Ratio | 1st | 4.923 |
| 2nd | 3.257 | |
| 3rd | 2.349 | |
| 4th | 1.944 | |
| 5th | 1.532 | |
| 6th | 1.193 | |
| 7th | 1.000 | |
| 8th | 0.801 | |
| 9th | 0.661 | |
| 10th | 0.613 | |
| Reverse | 4.307 | |
| Fluid Type | Toyota Genuine ATF WS | |
| Fluid Capacity | Models without Stop and Start System | 10.9 Liters (11.5 US qts, 9.6 Imp. qts)*1 11.8 Liters (12.5 US qts, 10.4 Imp. qts)*2 |
| Models with Stop and Start System | 11.0 Liters (11.6 US qts, 9.7 Imp. qts)*1 12.0 Liters (12.7 US qts, 10.6 Imp. qts)*2 |
|
| Weight (Reference)*3 | Models without Stop and Start System | 109.8 kg (242.1 lb)*1 116.4 kg (256.6 lb)*2 |
| Models with Stop and Start System | 110.5 kg (243.6 lb)*1 117.2 kg (258.4 lb)*2 |
|
Planetary Gears
| Front Planetary Gear Unit | No. of Large Sun Gear Teeth | 46 |
| No. of Small Sun Gear Teeth | 42 | |
| No. of Long Pinion Gear Teeth | 21 | |
| No. of Short Pinion Gear Teeth | 20 | |
| No. of Ring Gear Teeth | 90 | |
| Middle Planetary Gear Unit | No. of Sun Gear Teeth | 26 |
| No. of Pinion Gear Teeth | 36 | |
| No. of Ring Gear Teeth | 102 | |
| Rear Planetary Gear Unit | No. of Sun Gear Teeth | 26 |
| No. of Pinion Gear Teeth | 27 | |
| No. of Ring Gear Teeth | 82 |
Friction Engagement Components
| No. 1 Clutch (C1) | No. of Discs | 6 |
| No. 2 Clutch (C2) | 7 | |
| No. 3 Clutch (C3) | 6 | |
| No. 4 Clutch (C4) | 5 | |
| No. 1 Brake (B1) | No. of Discs | 4 |
| No. 2 Brake (B2) | 5 |
Torque Converter Assembly
| Engine Type | V35A-FTS | F33A-FTV |
|---|---|---|
| Torque Converter Type | 3-element, 1-step, 2-phase | ← |
| Stall Torque Ratio | 1.62 | 1.6 |
MAIN FEATURES
Aim of Development
A direct driving feel
Rhythmical shifting
A powerful and linear feeling of acceleration
Superior fuel economy performance
A top-class level of compactness
Achieving both quietness when driving at high speed and off-road driveability
Close Gear Ratios and Wide Gear Ratios
Close gear ratios are used to achieve rhythmical shifting with a good tempo during acceleration.
Wide gear ratios are used to achieve smooth and powerful start-off acceleration performance in low gears and suppress the engine speed in high gears, achieving quiet and relaxed high-speed driving. As a result, start-off performance and quietness are improved.
Motive Force Characteristics That Draw Out the Engine Characteristics and Optimization of Shift Timing
Motive force characteristics and downshift timing responsive to the accelerator operation of the driver have been optimized to achieve pleasant driving by drawing out the engine characteristics.
V35A-FTS engine
When the accelerator pedal is depressed strongly to draw out smooth torque characteristics up to high engine speed ranges, pleasant acceleration is provided by the motive force characteristics that emphasize a forceful feel and the shift timing.
F33A-FTV engine
The feeling of acceleration is emphasized even when the accelerator pedal is depressed by maintaining a low engine speed range and proactively drawing out a highly efficient range.