OUTLINE
Design Theme
Driving Pleasure
The comfort that is not affected even in harsh environments, the creation of a space where you can enjoy the highest quality as a flagship, and the operability that makes it easy to drive in any tight road surface make you feel the excitement as a Driving Pleasure. , And aimed at the ultimate moving space.
Overall Theme
Functional Beauty : Interior design aiming for a style backed by function
While inheriting the sturdiness and functional beauty that have been passed down as a full-fledged offloader, it has been given the charm of a sophisticated and deep adult as a flagship.
The upper part of the horizontal instrument panel that makes it easy to grasp the posture of the vehicle even in severe road surface changes (*A in illustration)
The center console expresses strength with a wide range of bold designs (*A in illustration)
The instrument panel, console, door trim has set design and soft pad that wraps around the occupant (*A in illustration). As a result, the knee circumference and each armrest (*B in illustration) stabilize the occupant's waist circumference and promote protection.
The design theme (*A in illustration) that wraps around the occupants and the color scheme (*B in illustration) that emphasizes the horizon of the instrument panel, which makes it easy to understand the vehicle posture, expresses a high-quality interior space with functionality and a sense of security.
The boldly placed decorations that pierce the center console accentuate the tough and dynamic shape that fits a large transmission. (*C in illustration)
Operation and Dsplay Function Layout
Various switches are grouped by function and arranged so that they can be operated intuitively even in rough road conditions.
In consideration of preventing erroneous operation under harsh road conditions, the functional beauty that balances usability and detail is achieved by arranging by function (*A in illustration) and emphasizing the unevenness of the switch part (*B in illustration).
The steering wheel adopts a horizontal shape that is in harmony with the instrument panel. (*A in illustration). As for the switches, audio operation switches are placed in the decorative part according to the center cluster (*B in illustration).
The operation switches of the drive system are integrated in the driver's hand, and the mode select is integrated into one switch. As a result, the function layout allows intuitive operation without distracting the line of sight.
MAIN FEATURES
Instrument Panel
General
The instrument panel console has a skin and decorations are placed in various places to create a high-class feeling.
*: Specifications with or without coating, plating, painting and skin differ depending on the grade.
| Parts | Secification | |
|---|---|---|
| *1 | Instorument Panel Safety Pad Cover | Soft Pad |
| *2 | Center Registers | Material Color : Black Silver Paint Satin Plating |
| *3 | Side Registers | Material Color : Black Silver Paint Satin Plating |
| *4 | Instrument Panel Pad LWR | Hard Material or Synthetic Leather |
| *5 | Instorument Panel Finish Panel LWR No. 3 | Satin Plating or Silver Paint |
| *6 | Console Panel UPR | Film (Carbon) Film (Wood) Hydro Graphic (Wood) Piano Black Paint |
| *7 | Console Box Pocket Garnish | Material Color : Black Satin Plating |
| *8 | Console Compartment Door Lock Sub-assembly | Interior Color Satin Plating |
| *9 | Console Box Insert FR No. 1 | Hard Material or Synthetic Leather |
| *10 | Console Box Register | Material Color : Black Silver Paint Satin Plating |
| *11 | Instrument Panel Register Bezel CTR No. 2 | Sputtering Paint Silver Paint |
| *12 | Instrument Panel Register Bezel CTR No. 1 | Film (Carbon) Film (Wood) Hydro Graphic (Wood) Piano Black Paint |
| *13 | Console Compartment Door Cover Sub-assembly INN | PVC or Synthetic Leather |
| *14 | Glove Compartment Door Outer | Hard Material or Synthetic Leather |
Specifications with or without coating, plating, painting and skin differ depending on the grade.
Combination Meter
A multi-information display set on all models.
The large display (7 inch or 4.2 inch color TFT) ) has been adopted for the combination meter to enhance the display contents that are easy for customers to understand.
| *1 | Display | - | - |
| *a | This illustration is an example only. | - | - |
| *1 | Display | - | - |
| *a | This illustration is an example only. | - | - |
Steering
General
A sporty 3-spoke type with function switches gathered on the left and right sides is used.
The steering wheel uses leather wrapping instead of urethane for the grip portion, and uses satin plated or silver painted garnish around the steering pad for a more luxurious feel.
| No. | Component Parts | Spesifications |
|---|---|---|
|
*: Models with garnish |
||
| *1 | Steering Wheel | Leather |
| *2 | Switch Bezel | Sati Plating or Silver Paint |
| *3 | Garnish* | Film (Carbon) Film (Wood) Hydro Graphic (Wood) |
Ignition Switch
A push type is adopted for the ignition switch, and a fingerprint authentication function is set according to the specifications.
| *A | Models with Fingerprint Authentication System | *B | Models without Fingerprint Authentication System |
| *1 | Push Start Switch | - | - |
| *a | This illustration is an example only. | - | - |
Shift Panel and Shift Lever Knob
The shift panel and shift lever knob are powerfully shaped by matching the design with the decorative ornaments in the room.
Two types of decoration specifications have been set for the shift lever knob.
| No. | Component Parts | Standard Grade Type | High Grade Type |
|---|---|---|---|
| *a | Shift Lever Knob Ornament | PVC (Material Color Black) | Leather |
| *b | Shift Lever Knob Bezel | Satin Plating | Satin Plating |
| *c | Shift Lever Knob | PVC (Material Color Black) | Leather |
| *d | Boot Cover | Material Color Black | Satin Plating |
Door
Door Trim
The front and rear door assist grips focus on providing support during off-road driving, and use a thick and solid shape.
| No. | Component Parts | Standard Grade Type | High Grade Type |
|---|---|---|---|
|
*: Models with tweeter |
|||
| *a | Front Door Trim Panel Upper Pad | Elastomer | |
| *b | Front Door Armrest | Synthetic Leather (Soft Leather) |
Synthetic Leather (Neosofeel) |
| *c | Front Door Switch Base | Black Metallic Paint | Film (Carbon) Film (Wood) Hydro Graphic (Wood) |
| *d | Front Door Pocket | with Bottle Holder | |
| *e | Front Door Switch Box | Hard Material | Synthetic Leather (Neosofeel) |
| *f | Inside Door Handle Lever FR | Material Color | Satin Plating |
| *g | Rear Door Armrest | Synthetic Leather (Soft Leather) |
Synthetic Leather (Neosofeel) |
| *h | Rear Door Switch Base | Black Metallic Paint | Film (Carbon) Film (Wood) Hydro Graphic (Wood) |
| *i | Rear Door Pocket | with Bottle Holder | |
| *j | Inside Door Handle Lever RR | Material Color | Satin Plating |
| *k | Tweeter Grille Ring* | - | Satin Plating |
| *l | Rear Door Trim Panel Upper Pad | Elastomer | |
Seat
General
Genuine leather, synthetic leather, fabric (high), and fabric (standard) are used for the seat skin.
Setting the left and right cushions of the front seat high, high holdability is ensured.
By thinning the seat back of the front seat, the knee space of the rear No. 1 seat occupant has been expanded to ensure comfortable seating.
A gapless lock is used for the fixed lock on the rear No. 1 seat.
High operability has been ensured by reviewing the lever shape of the rear No. 1 seat. Tumble storage operation from the rear is possible.
A high rear view is secured by storing the rear No. 2 seat at the bottom of the luggage.
Seat Variation
Gradually raising the seating surface of the rear seats, a wide field of view is secured and the comfort of the rear seat occupants is taken into consideration.
| *A | 7-Passengers Models | *B | 5-Passengers Models |
| *a | This illustration is an example only. | - | - |
Seat Covor
Adopting a zigzag pattern custom perforations, both air conditioning performance and design are achieved.
| *a | Perforation | *b | Double Stitch |
A perforation is used for the main part of the seat to ensure high breathability.
| *a | Perforation | *b | Double Stitch |
| *c | Single Stitch | - | - |
A large H pattern embossing is applied to the main part of the seat to express a three-dimensional effect and strength.
The glossy fabric gives it a glossy and luxurious feel.
| *a | Emboss | - |
A three-dimensional pattern is applied to the highly heat-shielding pile skin to give it breathability.
| *a | Three-dimensional Pattern | - |
Split Folding Tumble Seat (Rear No. 1 Seat)
40/20/40 or 60/40 split folding tumble seats are provided for the rear No. 1 seat depending on the model.
Illumination
Interior illumination is provided throughout the vehicle out of consideration for usability.
| *1 | Front Foot Light LH | *2 | Front Foot Light RH |
| *3 | Glove Box Light | - | - |
| *a | This illustration is an example only. | - | - |
| *1 | Front Dome Light/Front Map Light | *2 | Front Inside Door Handle Illumination |
| *3 | Rear Inside Door Handle Illumination | *4 | Front Courtesy Light |
| *5 | Rear Courtesy Light | *6 | Luggage Compartment Light (LH Only) |
| *7 | No. 2 Dome Light Assembly | *8 | No. 1 Dome Light Assembly |
| *9 | Vanity Light | - | - |
| *a | There may be no settings or settings may differ depending on the specifications. | - | - |
Storage
Glove Box
A middle tray is set inside the glove box to improve usability.
The doorknob for opening is set closer to the center of the vehicle, giving consideration to access from the driver.
| *1 | Glove Compartment Door Lock Knob | *2 | Glove Compartment Panel |
| *a | This illustration is an example only. | - | - |
Console Cup Holder
A adopted a console cup holder that can adjust the depth on the driver's side in two stages. By attaching and detaching the middle tray, the depth of the cup holder can be changed according to the height of stored items such as PET bottles. The removed middle tray can be stored on the passenger seat side.
| *A | Upper Position | *B | Lower Position |
| *C | Driver Side | *D | Passenger Side |
| *1 | Console Cup Holder Box Sub-assembly | *2 | Cup Holder Hole Covor |
| *a | Standard Depth | *b | Deep Depth |
| *c | This illustration is an example only. | - | - |
Console Box
The console box is a rear console box Sub-assy that opens on both sides. Open switches have been placed on the left, right, and rear of the console compartment door Sub-assy to make it easy to access not only from the driver's side and passenger's seat, but also from the rear seats.
A refrigerator is used for the console box according to the specifications. For specifications without a refrigerator, a middle tray is used as a storage space for small items such as smartphones.
| *A | Close State | *B | Open State (Driver Side) |
| *C | Open State (Passenger Side) | - | - |
| *1 | Console Compartment Door Lock Sub-assembly (Driver Side) | *2 | Console Compartment Door Lock Sub-assembly (Rear Side) |
| *3 | Console Compartment Door Lock Sub-assembly (Passenger Side) | *4 | Small Tray |
| *a | Open operation from driver side and rear side. | *b | Open operation from passenger side. |
| *c | This illustration is an example only. | - | - |
| *A | Console Refrigerator Type | *B | Console Storage Type |
| *a | This illustration is an example only. | - | - |
Storage Space
A storage space availability differs depending on the model.
The storage items in various parts of the interior.
| *A | Models with Storage Space | - | - |
| *a | Glasses Case | *b | Drink Holder (for Rear No. 1 Seat Passenger) |
| *c | Drink Holder (for Rear No. 2 Seat Passenger) | *d | Small Item Storage |
| *e | This illustration is an example only. | - | - |
Deck Space and Under Deck Floor Storage Space
The 5-passengers model can carry 5 sets of golf bags and 5 suitcases in the deck space. (May change depending on shape and size)
| *A | Image of loading golf bags. | *B | Image of loading suitcases. |
| *a | This illustration is an example only. | - | - |
The storage space that can be stored a set of tools and accessories were maintained under the deck board. In addition, the deck board has adopted a self-supporting structure in consideration of usability.
| *a | Storage Space | *b | Deck Board Self Supporting Strap |
| *c | This illustration is an example only. | - | - |
The 7-passengers model can accommodate one set of golf bags and two suitcases in the deck space when using the third row seats. When the third row seats are stored, 5 sets of golf bags and 5 suitcases can be installed. (May change depending on shape and size)
| *A | Rear No. 2 Seat Storage State | *B | Rear No. 2 Seat Deployed State |
| *C | Image of loading golf bags. | *D | Image of loading suitcases. |
| *a | This illustration is an example only. | - | - |
The storage space that can be stored a set of tools and accessories were maintained under the deck board.
| *a | Storage Space | *b | This illustration is an example only. |
Functional Items and Equipment
Set the following equipment in consideration of usability
A DC 5V USB socket has been provided on the lower portion of the instrument panel, on the back side of the console box and both side of the quarter trim.
A DC 12V power outlet socket has been provided on the lower portion of the instrument panel, on the back side of the console box and in the luggage compartment.
An AC 220V power outlet socket has been provided in the luggage compartment.
A USB/AUX terminals has been provided on the lower portion of the instrument panel and on the back side of the console box.
A headphone jacks has been provided on the back side of the console box.
A USB port has been provided on the back side of the console box.
An HDMI terminal has been provided on the back side of the console box.
An wireless charger has been provided in the console box upper.
Settings may vary depending on grade and specifications.
| *1 | USB Port | *2 | USB/AUX Terminals |
| *3 | DC 12V Power Outlet Socket | *4 | Non-contact Charger |
| *a | This illustration is an example only. | *b | Settings may vary depending on grade and specifications. |
| *1 | Headphone Jack | *2 | USB/AUX Terminals |
| *3 | DC 12V Power Outlet Socket | *4 | HDMI Terminal |
| *a | This illustration is an example only. | *b | Settings may vary depending on grade and specifications. |
| *1 | DC 5V USB Socket | - | - |
| *a | This illustration is an example only. | *b | Settings may vary depending on grade and specifications. |
| *A | Models with AC 220V Power Outlet Socket | *B | Models with DC 12V Power Outlet Socket |
| *1 | AC 220V Power Outlet Socket | *2 | DC 12V Power Outlet Socket |
| *a | This illustration is an example only. | *b | Settings may vary depending on grade and specifications. |
Sound Absorbing and Vibration Damping Material
The placement of sound absorbing materials on the back surface of the instrument panel and the back of the panel parts and the use of urethane foam on the front end of the instrument panel suppress the penetration of engine noise from the cowl portion and enhance quietness.
| *1 | No. 4 Instrument Panel Cushion | *2 | Thinsulate (No. 2 Heater to Register Duct) |
| *3 | Urethane (Defroster Nozzle Assembly) | *4 | No. 2 Instrument Panel Cushion |
| *5 | Urethane (No. 1 Instrument Panel Under Cover Sub-assembly) | *6 | Urethane (No. 2 Instrument Panel Under Cover Sub-assembly) |
| *a | This illustration is an example only. | - | - |
Sound insulation materials are optimally placed throughout the interior to match acoustic characteristics. As a result, a quiet interior space is achieved.
| *A | Models with Standard Roof | *B | Models with Sliding Roof System |
| *1 | Roof Headlining | *2 | Urethane |
| *3 | No. 2 Roof Silencer Pad | *4 | No. 1 Roof Silencer Pad |
| *5 | No. 4 Roof Silencer Pad | *6 | Front Floor Carpet Assembly |
| *7 | No. 2 Dash Panel Insulator Pad | *8 | No. 3 Dash Panel Insulator Pad |
| *9 | Front Floor Mat | *10 | Rear Floor Silencer |
| *11 | Quarter Trim Panel Assembly | *12 | Rear Door Trim Board Sub-assembly |
| *13 | Lower Center Pillar Garnish | *14 | Front Door Trim Board Sub-assembly |
| *15 | Cowl Side Trim Board | *16 | Inner Roof Side Garnish |
| *17 | Quarter Pillar Garnish | *18 | Center Pillar Garnish |
| *19 | Front Pillar Garnish Assembly | *20 | Dash Panel Silencer Assembly |
Safety Features
A head impact absorbing structure is used for all models. As a result, impact to passengers' heads are reduced if passengers are subject to a secondary collision with the interior due to impact during a collision.
A door trim pad lower is used in the pelvic area of the front door trim board sub-assembly. As a result, impact from the vehicle side to passengers is reduced, protecting passengers.
| *1 | Front Door Trim Pad Center | - | - |
| *a | Head Impact Mitigation Structure | *b | This illustration is an exapmle only. |
GR SPORT
The GR SPORT model expresses sportiness by setting special parts in each part of the interior to create a special feeling.
Carbon decoration and GR emblem are set on the steering wheel.
| *a | Carbon Decoration | *b | GR Emblem |
The seat has a different skin color based on genuine leather specifications, and the GR logo has been added to the headrest.
| *a | GR Logo (Enbroidery) | *b | Double Stitch |
| *c | This illustration is an example only. | - | - |
The GR logo has been set on the electrical key and engine switch.
| *1 | Engine Switch | *2 | Electrical Key (Electrical Key Transmitter Sub-assembly) |
| *a | GR Logo | - | - |