CONSTRUCTION
The structure of the oil pan is divided into 2 parts, using the oil pan sub-assembly, made from aluminum alloy, and the No. 2 oil pan sub-assembly, made from press-formed steel plates.
Ribs are positioned inside the oil pan sub-assembly and No. 2 oil pan sub-assembly to reduce the radiated noise.
The lower surface at the front of the oil pan is raised to reduce the amount of oil that accumulates at the front when driving downhill and ensure that a sufficient oil amount accumulates in the No. 2 oil pan sub-assembly.
A convex shape is used for the oil pan drain plug installation area, improving oil drainability during engine oil replacement work.
| *1 | Oil Pan Sub-assembly | *2 | No. 2 Oil Pan Sub-assembly |
| *3 | Oil Pan Drain Plug | - | - |
| *a | Rib | *b | Convex Shape |