FUNCTION OF MAIN COMPONENTS
| Component | Function | |
|---|---|---|
| ECM | Controls the EGR system based on signals from each sensor. | |
| Electric EGR Control Valve Assembly | Actuated by the ECM, this valve controls the flow rate of EGR gas. | |
| EGR Valve Position Sensor (Built into Electric EGR Control Valve Assembly) | Detects the EGR valve position. | |
| No. 2 EGR Valve Assembly | Switches the EGR gas passages continuously. | |
| No. 2 EGR Valve Position Sensor (Built into No. 2 EGR Valve Assembly) | Detects the No. 2 EGR valve position. | |
| Diesel Throttle Body Assembly | Diesel Throttle Valve | Actuated by the ECM, this valve controls the flow rate of intake air. |
| Throttle Position Sensor | This sensor detects the diesel throttle valve opening angle | |
| EGR Gas Temperature Sensor | Detects the EGR gas temperature. | |
| Accelerator Pedal Rod with Sensor Assembly | Detects the accelerator opening. | |
| Diesel Engine Engine Coolant Temperature Sensor | Detects the engine coolant temperature. | |
| Mass Air Flow Meter Sub-assembly | Detects the intake air volume and intake air temperature. | |
| Intake Air Temperature Switch (for Intercooler Outlet Side) | Detects the intake air temperature. | |
| Crank Position Sensor | Detects the crank angle and engine speed. | |
| Diesel Turbo Turbo Pressure Sensor | Detects the turbo pressure after passing through the intercooler assembly. | |
| No. 1 EGR Cooler | Cools EGR gas. | |
| No. 2 EGR Cooler | ||
SYSTEM CONTROL
The EGR system carries out the following controls:
The ECM actuates the electric EGR control valve assembly, which regulates the volume of EGR gas recirculation, in accordance with the engine condition.
The ECM continuously switches the amount of EGR gas passing through the EGR cooler via the No. 2 EGR valve assembly to optimize the EGR gas temperature.