Home › Vehicle Exterior › HORN › HORN
RM38G0E _59 Vehicle Exterior _100454 HORN _0467194 HORN G

HORN  HORN  INSPECTION  


PROCEDURE

Hide 86510 1.INSPECT HIGH PITCHED HORN ASSEMBLY

B072268C04
0.063,0.073 0.375,0.271 0.313,0.198 10 false *a
*a Component without harness connected
(High Pitched Horn Assembly)


a.

Apply battery voltage and check operation of the horn as shown in the table below.

OK:
Measurement Condition Specified Condition
B33-1- Auxiliary battery positive (+)
Horn stay - Auxiliary battery negative (-)
High pitched horn sounds


If the result is not as specified, replace the horn.


Hide 86520 2.INSPECT LOW PITCHED HORN ASSEMBLY

a.
B072268C03
0.073,0.052 0.385,0.25 0.313,0.198 10 false *a
*a Component without harness connected
(Low Pitched Horn Assembly)


Apply battery voltage and check operation of the horn as shown in the table below.

OK:
Measurement Condition Specified Condition
B32-1- Auxiliary battery positive (+)
Horn stay - Auxiliary battery negative (-)
Low pitched horn sounds


If the result is not as specified, replace the horn.