Home › Vehicle Exterior › WIPER / WASHER › REAR WIPER MOTOR
RM38G0E _59 Vehicle Exterior _100456 WIPER / WASHER _0467204 REAR WIPER MOTOR G

WIPER / WASHER  REAR WIPER MOTOR  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 85110R 1.INSPECT REAR WIPER MOTOR ASSEMBLY

a.
C457202C01
2.396,2.635 2.094,2.958 true 2.667,2.323 2.781,2.5 0.115,0.177 10 true A 1.938,2.958 2.135,3.135 0.198,0.177 10 true *a 2.719,2.708 2.844,2.875 0.125,0.167 10 true A
*a Alignment Mark


Operate the rear wiper motor assembly.


b.

Stop the rear wiper motor assembly operation.


c.

Check the automatic stop position.

HINT:

After the rear wiper motor is stopped, check the automatic stop position after lifting the rear wiper blade 2 times.


Standard Clearance:
Area Measurement
A 10 mm (0.394 in.)


OK:

The rear wiper stops at the position shown in the illustration.