85310 1.INSPECT WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY
This check should be performed with the windshield washer motor and pump assembly installed to the washer jar.
Fill the washer jar with washer fluid.
| *a | Component without harness connected (Windshield Washer Motor and Pump Assembly) |
Apply battery voltage to the washer motor and check the operation of the washer motor.
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) → B50-1 (B) Battery negative (-) → B50-2 (SW) |
Windshield washer motor operation is normal |
If the result is not as specified, replace the windshield washer motor and pump assembly.