1.INSPECT WASHER NOZZLE
Operate the washer nozzle sub-assemblies and check the position that the washer fluid contacts the windshield.
Center of washer fluid contacts the windshield in the areas shown in the illustration.
| *a | Upper Limit | *b | Standard |
| *c | Lower Limit | - | - |
|
Measurement | - | - |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 100.9 mm (3.97 in.) | B | 94.2 mm (3.71 in.) |
| C | 276.4 mm (10.88 in.) | D | 109 mm (4.29 in.) |
If the result is not as specified, replace the washer nozzle sub-assembly.