84988L 1.INSPECT VSC OFF SWITCH
Check the resistance.
| *a | Component without harness connected (VSC OFF Switch) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
Click Location & Routing(I77)Location & Routingewd_type=routing;type=c;code=I77 |
||
| I77-5(+) - I77-2(E) | Switch pushed | Below 1 Ω |
| Switch not pushed | 10 kΩ or higher | |
If the result is not as specified, replace the VSC OFF switch.
Check the illumination.
| *a | Component without harness connected (VSC OFF Switch) |
Apply battery voltage to the VSC OFF switch.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
Click Location & Routing(I77)Location & Routingewd_type=routing;type=c;code=I77 |
||
| I77-6(ILL+) - I77-1(ILL-) | I77-6(ILL+) - Battery positive (+) I77-1(ILL-) - Battery negative (-) |
Illuminates |
If the result is not as specified, replace the VSC OFF switch.