85531 1.INSPECT POWER OUTLET SOCKET (for AC Power Supply)
| *a | Front view of power outlet socket (Power Outlet Socket (for AC Power Supply)) |
| *b | Component without harness connected (Power Outlet Socket (for AC Power Supply)) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
Click Location & Routing(U6)Location & Routingewd_type=routing;type=c;code=U6 Click Connector(U6)Body>No. 2 Room Wire>No. 2 Power Outlet Socket Assemblyewd_type=component;type=c;code=U6;pinno=5,8,1 |
||
| A - U6-5 (ACC1) | Always | Below 1 Ω |
| B - U6-8 (ACC2) | Always | Below 1 Ω |
| C - U6-1 (E) | Always | Below 1 Ω |
| U6-5 (ACC1) - U6-1 (E) | Always | 10 kΩ or higher |
| U6-8 (ACC2) - U6-1 (E) | Always | 10 kΩ or higher |
| U6-5 (ACC1) - U6-8 (ACC2) | Always | 10 kΩ or higher |
If the result is not as specified, replace the power outlet socket (for AC Power Supply).