Home › Drivetrain › JF2BM (TRANSFER / 4WD / AWD) › TRANSFER OIL
RM38G0E _52 Drivetrain _100437 JF2BM TRANSFER / 4WD / AWD _0467358 TRANSFER OIL G

JF2BM TRANSFER / 4WD / AWD  TRANSFER OIL  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.CHECK TRANSFER OIL

NOTICE:

Check the transfer oil level 14 minutes or more passed after the vehicle has stopped.

If the transfer oil level is checked without the transfer oil level stable, the transfer oil is excess and causes trouble.


a.
C453516

Remove the filler plug and gasket.


b.
C282090C04
2.646,0.875 2.958,1.031 0.313,0.156 10 false *a
*a 0 to 5 mm (0 to 0.196 in.)


Check that the oil level is between 0 to 5.0 mm (0 to 0.196 in.) from the bottom lip of the filler plug hole.

NOTICE:
·

Too much or too little transfer oil will lead to transfer problems.

·

Stop the vehicle on a level surface.




c.

If the transfer oil level is low, check for transfer oil leaks, and then add transfer oil.


d.

Install a new gasket onto the filler plug and then install the filler plug.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)