Home › Engine / Hybrid System › V35A-FTS (ENGINE CONTROL) › MANIFOLD ABSOLUTE PRESSURE SENSOR
RM38G0E _51 Engine / Hybrid System _100526 V35A-FTS ENGINE CONTROL _0467373 MANIFOLD ABSOLUTE PRESSURE SENSOR G

V35A-FTS ENGINE CONTROL  MANIFOLD ABSOLUTE PRESSURE SENSOR  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 89421L 1.INSPECT NO. 2 TURBO PRESSURE SENSOR

a.

Warm up the engine.


b.

Turn the A/C switch off.


c.

According to the display on the GTS, read the Data List.

Powertrain > Engine > Data List
Tester Display
Boost Pressure Sensor
50003 372 269

d.

Read the air pressure value from the Data List.

HINT:
·

Standard atmospheric pressure is approximately 101 kPa (abs) (15 psi (abs)).

·

For every 100 m (328 ft.) increase in altitude, atmospheric pressure drops by approximately 1 kPa (0.15 psi). This varies by weather.




e.

Using a vacuum pump, set the No. 2 turbo pressure sensor.


f.

Using a vacuum pump, read the value when pressure is applied and when pressure is decreased.

OK:

The pressure values when applying pressure or decreasing pressure using the vacuum pump and the Data List values are nearly the same.


NOTICE:
·

Do not apply a pressure of 50 kPa (0.5 kgf/cm2, 7.3 psi) or more to the No. 2 turbo pressure sensor.

·

Do not apply a vacuum of 50 kPa (375 mmHg, 14.8 in.Hg) or more to the No. 2 turbo pressure sensor.



HINT:

The pressure value displayed in the Data List is the pressure value indicated on the vacuum pump with the air pressure value added.

Example:
Vacuum Pump Pressure Value Air Pressure Value Equation Data List Value
When vacuum is applied at 30 kPa (225 mmHg, 8.86 in.Hg) 100 kPa (1.0 kgf/cm2, 15 psi) -30 + 100 = 70 70 kPa (0.7 kgf/cm2, 10.2 psi)
When pressure is applied at 30 kPa (0.3 kgf/cm2, 4 psi) 30 + 100 = 130 130 kPa (1.3 kgf/cm2, 19 psi)