Home › Engine / Hybrid System › 1GR-FE (ENGINE CONTROL) › CAMSHAFT OIL CONTROL VALVE
RM38G0E _51 Engine / Hybrid System _100527 1GR-FE ENGINE CONTROL _0467379 CAMSHAFT OIL CONTROL VALVE G

1GR-FE ENGINE CONTROL  CAMSHAFT OIL CONTROL VALVE  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 15330B 1.CHECK CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

a.

Connect the GTS to the DLC3.


b.

Start the engine and turn the GTS on.


c.

Turn the A/C switch on.


d.

Inspect the camshaft timing oil control valve assembly RH (for intake side of bank1).

i.

Enter the following menus: Powertrain / Engine / Active Test / Control the Intake VVT OCV Duty Ratio Bank 1.

Powertrain > Engine > Active Test
Tester Display
Control the Intake VVT OCV Duty Ratio Bank 1
50004 372 4

ii.

Check the engine speed while operating the camshaft timing oil control valve assembly RH. using the GTS.

Standard Condition:
Control Range Specified Condition
-100% Normal engine speed
100% Rough idle or engine stalls soon after oil control valve switched to 100%


If the operation is not as specified, check the camshaft timing oil control valve assembly RH, wire harness and ECM.



e.

Inspect the camshaft timing oil control valve assembly RH (for exhaust side of bank1).

i.

Enter the following menus: Powertrain / Engine / Active Test / Control the Exhaust VVT OCV Duty Ratio Bank 1.

Powertrain > Engine > Active Test
Tester Display
Control the Exhaust VVT OCV Duty Ratio Bank 1
50004 372 5

ii.

Check the engine speed while operating the camshaft timing oil control valve assembly RH using the GTS.

Standard Condition:
Control Range Specified Condition
-100% Normal engine speed
100% Rough idle or engine stalls soon after oil control valve switched to 100%


If the operation is not as specified, check the camshaft timing oil control valve assembly RH, wire harness and ECM.



f.

Inspect the camshaft timing oil control valve assembly LH (for intake side of bank2).

i.

Enter the following menus: Powertrain / Engine / Active Test / Control the Intake VVT OCV Duty Ratio Bank 2.

Powertrain > Engine > Active Test
Tester Display
Control the Intake VVT OCV Duty Ratio Bank 2
50004 372 45

ii.

Check the engine speed while operating the camshaft timing oil control valve assembly LH using the GTS.

Standard Condition:
Control Range Specified Condition
-100% Normal engine speed
100% Rough idle or engine stalls soon after oil control valve switched to 100%


If the operation is not as specified, check the camshaft timing oil control valve assembly LH, wire harness and ECM.



g.

Inspect the camshaft timing oil control valve assembly LH (for exhaust side of bank2).

i.

Enter the following menus: Powertrain / Engine / Active Test / Control the Exhaust VVT OCV Duty Ratio Bank 2.

Powertrain > Engine > Active Test
Tester Display
Control the Exhaust VVT OCV Duty Ratio Bank 2
50004 372 46

ii.

Check the engine speed while operating the camshaft timing oil control valve assembly LH using the GTS.

Standard Condition:
Control Range Specified Condition
-100% Normal engine speed
100% Rough idle or engine stalls soon after oil control valve switched to 100%


If the operation is not as specified, check the camshaft timing oil control valve assembly LH, wire harness and ECM.