TROUBLESHOOTING PRECAUTION
When there is a malfunction in the contact point of the terminals or installation problems with parts, removal and installation of the suspected problem parts may return the system to the normal condition either completely or temporarily.
In order to determine the malfunctioning area, be sure to check the conditions at the time the malfunction occurred, such as by DTC output, and record them before disconnecting each connector or removing and installing parts.
Since the transfer system may be influenced by a malfunction in other systems, be sure to check for DTCs in the other systems.
CAN COMMUNICATION SYSTEM PRECAUTION
The CAN communication system is used for data communication between each of the ECUs and sensors. If there is trouble in the CAN communication line, a CAN communication line DTC is output.
If a CAN communication line DTC is output, repair the malfunction in the communication line and troubleshoot the transfer system.
Since the CAN communication line has its own length and route, it cannot be repaired temporarily with a bypass wire, etc.
PRECAUTIONS FOR REPLACEMENT OF 4 WHEEL DRIVE CONTROL ECU
When replacing the 4 wheel drive control ECU, preform an ECU security key update.
Click hereGeneral>SETUP>WHEN REPLACING OR REMOVING/INSTALLING PARTS>UPDATE ECU SECURITY KEY