Home › Drivetrain › JF2BM (TRANSFER / 4WD / AWD) › TRANSFER SYSTEM
RM38G0E _52 Drivetrain _100437 JF2BM TRANSFER / 4WD / AWD _0467431 TRANSFER SYSTEM D

JF2BM TRANSFER / 4WD / AWD  TRANSFER SYSTEM  FREEZE FRAME DATA  


FREEZE FRAME DATA


a.

When a DTC is stored, the 4 wheel drive control ECU stores the current vehicle state as Freeze Frame Data.

HINT:

Freeze Frame Data at the time a DTC is stored:

When the 4 wheel drive control ECU stores data at the time a DTC is stored, no updates will be performed until the data is cleared.




CHECK FREEZE FRAME DATA


a.

Display the DTCs on the DTC check screen.

Powertrain > Four Wheel Drive > Trouble Codes
50001 442

b.

Check the freeze frame data on the GTS.

Powertrain > Four Wheel Drive
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Total Distance Traveled Total distance traveled 0 to 16777215 Total distance traveled -
Total Distance Traveled - Unit Unit for total distance traveled -, km or mile Unit for total distance traveled -
Transmission Information Specification of installed transmission MT, AT, CVT, MMT, SMT, HV AT or Undefined Specification of installed transmission -
VSC System Whether VSC system is present Without or With Without: w/o VSC
With: w/ VSC
-
Shift Switch Status (N Range) Status of shift lever (N position) OFF or ON OFF: Shift lever not in N
ON: Shift lever in N
-
Shift Switch Status (P Range) Status of shift lever (P position) OFF or ON OFF: Shift lever not in P
ON: Shift lever in P
-
Stop Light Switch Stop light switch assembly condition OFF or ON OFF: Brake pedal released
ON: Brake pedal depressed
-
IGP 1 Ignition switch condition OFF or ON ON: Ignition switch ON -
IGP 2 Ignition switch condition OFF or ON ON: Ignition switch ON -
FR Wheel Speed Front wheel speed sensor RH reading Min.: -67.67 km/h (-42.05 mph)
Max.: 260.00 km/h (161.56 mph)
Vehicle stopped: 0.00 km/h (0.00 mph) No large fluctuations when driving at a constant speed.
FL Wheel Speed Front wheel speed sensor LH reading Min.: -67.67 km/h (-42.05 mph)
Max.: 260.00 km/h (161.56 mph)
Vehicle stopped: 0.00 km/h (0.00 mph) No large fluctuations when driving at a constant speed.
RR Wheel Speed Rear wheel speed sensor RH reading Min.: -67.67 km/h (-42.05 mph)
Max.: 260.00 km/h (161.56 mph)
Vehicle stopped: 0.00 km/h (0.00 mph) No large fluctuations when driving at a constant speed.
RL Wheel Speed Rear wheel speed sensor LH reading Min.: -67.67 km/h (-42.05 mph)
Max.: 260.00 km/h (161.56 mph)
Vehicle stopped: 0.00 km/h (0.00 mph) No large fluctuations when driving at a constant speed.
Vehicle Speed Maximum wheel speed sensor reading Min.: 0.00 km/h (0.00 mph)
Max.: 655.35 km/h (407.23 mph)
Vehicle stopped: 0.00 km/h (0.00 mph) No large fluctuations when driving at a constant speed.
Engine Speed Engine speed Min.: -25600.00 rpm
Max.: 25599.22 rpm
Engine speed -
Ambient Temperature Ambient temperature Min.: -40°C (-40°F)
Max.: 50°C (122°F)
Unset or Out of Range
Ambient temperature -
H-L Shift Switch Transfer position switch status OFF or ON OFF: H4
ON: L4
-
Center Differential Lock Control Switch Center differential lock switch (transfer position switch) status OFF or ON OFF: Not pressed
ON: Pressed and held
-
Rear Differential Lock Control Switch Rear differential lock switch status OFF or ON OFF: Not pressed
ON: Pressed and held
w/ Rear Differential Lock
Front Differential Lock Control Switch Front differential lock switch status OFF or ON OFF: Not pressed
ON: Pressed and held
w/ Front Differential Lock
Center Differential Lock Limit Switch (TL2) Center differential lock limit switch (TL2) OFF or ON OFF: Free
ON: Switching between Free and Lock, or Lock
-
Center Differential Lock Limit Switch (TL3) Center differential lock limit switch (TL3) OFF or ON OFF: Lock
ON: Free, or switching between Free and Lock
-
H-L Limit Switch (HL1) High-low limit switch (HL1) OFF or ON OFF: L4
ON: H4
·

Switches from ON to OFF: Switching from H4 to L4

·

Switches from OFF to ON: Switching from L4 to H4


H-L Limit Switch (HL2) High-low limit switch (HL2) OFF or ON OFF: H4
ON: L4
·

Switches from OFF to ON: H4 → Switching from H4 to L4

·

Switches from ON to OFF: Switching from L4 to H4


H-L Limit Switch (HL3) High-low limit switch (HL3) OFF or ON OFF: L4 or H4
ON: Switching
-
Center Differential Position Switch Center differential lock position switch condition signal OFF or ON OFF: Free
ON: Lock
-
Rear Differential Lock Position Switch Rear differential lock position switch (differential lock indicator switch) condition signal OFF or ON OFF: Free
ON: Lock
w/ Rear Differential Lock
L4 Position Signal L4 position condition signal OFF or ON OFF: H4 or switching
ON: L4 or Low to High switching
-
Center Differential Lock Position Signal Center differential lock condition signal OFF or ON OFF: Free
ON: Lock
-
Rear Differential Lock Position Signal Rear differential lock condition signal OFF or ON OFF: Free
ON: Lock
w/ Rear Differential Lock
Front Differential Lock Position Signal Front differential lock condition signal OFF or ON OFF: Free
ON: Lock
w/ Front Differential Lock
4WD Position Signal 4WD condition signal OFF or ON ON: 4WD -
L4 Output Signal L4 position condition signal OFF or ON OFF: H4 or switching
ON: L4 or Low to High switching
-
Motor Energization Status Signal Motor power signal status OFF or ON OFF: Power not supplied to motor
ON: Power supplied to motor
-
Crawl Control Cancel Signal Crawl control cancel signal OFF or ON OFF: Crawl control not canceled
ON: Crawl control canceled
-
H-L Actuator Fail Signal High-low shift actuator malfunction status OFF or ON OFF: High-low shift actuator normal
ON: High-low shift actuator malfunction
-
Transfer H-L Shifting Signal Switching between H4 and L4 OFF or ON OFF: Not switching
ON: Switching
-
Buzzer Request Buzzer sounding request No Sound, Sound or Sound (3 Times) No Sound: Does not sound
Sound: Sounds
Sound (3 times): Sounds 3 times
-
L4 Indicator Request 4LO indicator light request OFF, ON, Blink1, Blink2 or Blink3 OFF: Indicator light turns off
ON: Indicator light illuminates
Blink1: Indicator light blinks
Blink2: Indicator light blinks 3 times
Blink3: Indicator light rapidly blinks
·

Blinking: 0.5 second intervals (0.5 seconds on and 0.5 seconds off)

·

Rapidly blinking: 0.25 second intervals (0.25 seconds on and 0.25 seconds off)


Center Differential Lock Indicator Request Center differential lock indicator light request OFF, ON, Blink1, Blink2 or Blink3 OFF: Indicator light turns off
ON: Indicator light illuminates
Blink1: Indicator light blinks
Blink2: Indicator light blinks 3 times
Blink3: Indicator light rapidly blinks
·

Blinking: 0.5 second intervals (0.5 seconds on and 0.5 seconds off)

·

Rapidly blinking: 0.25 second intervals (0.25 seconds on and 0.25 seconds off)


Rear Differential Lock Indicator Request Rear differential lock indicator light request OFF, ON, Blink1, Blink2 or Blink3 OFF: Indicator light turns off
ON: Indicator light illuminates
Blink1: Indicator light blinks
Blink2: Indicator light blinks 3 times
Blink3: Indicator light rapidly blinks
·

Blinking: 0.5 second intervals (0.5 seconds on and 0.5 seconds off)

·

Rapidly blinking: 0.25 second intervals (0.25 seconds on and 0.25 seconds off)

·

w/ Rear Differential Lock


Front Differential Lock Indicator Request Front differential lock indicator light request OFF, ON, Blink1, Blink2 or Blink3 OFF: Indicator light turns off
ON: Indicator light illuminates
Blink1: Indicator light blinks
Blink2: Indicator light blinks 3 times
Blink3: Indicator light rapidly blinks
·

Blinking: 0.5 second intervals (0.5 seconds on and 0.5 seconds off)

·

Rapidly blinking: 0.25 second intervals (0.25 seconds on and 0.25 seconds off)

·

w/ Front Differential Lock


IGR Voltage IG monitor voltage Min.: 0.0 V
Max.: 25.5 V
10 to 16 V: Ignition switch ON -
Motor Voltage Motor driver circuit monitor voltage Min.: 0.0 V
Max.: 25.5 V
- -
Rear Differential Lock Solenoid Voltage Rear differential lock solenoid voltage Min.: 0.0 V
Max.: 25.5 V
- w/ Rear Differential Lock
Front Differential Lock Solenoid Voltage Front differential lock solenoid voltage Min.: 0.0 V
Max.: 25.5 V
- w/ Front Differential Lock
Front Differential Lock Position Sensor Voltage Front differential lock position sensor (No. 1 4 wheel drive position switch) voltage Min.: 0.0 V
Max.: 25.5 V
- w/ Front Differential Lock
Front Differential Lock Position Sensor Power Supply Voltage Front differential lock position sensor (No. 1 4 wheel drive position switch) power supply voltage Min.: 0.0 V
Max.: 25.5 V
- w/ Front Differential Lock
Center Differential Lock Motor Output Center differential lock motor output Stop, Free to Lock or Lock to Free Stop: Output stopped
Free to Lock: Switching from Free to Lock
Lock to Free: Switching from Lock to Free
-
Center Differential Lock Motor Setting Duty Center differential lock motor cycle Min.: 0%
Max.: 100%
- -
Center Differential Lock Motor Actual Current Center differential lock motor actual current Min.: 0.0 A
Max.: 25.5 A
- -
Center Differential Lock Motor Carrying Status Center differential lock motor energization status Carrying Stop, Carrying Setup, Carrying Start, Full Carrying, Torque Up, Carrying OFF, First Low Current, Low Current, High Current or Carrying End - -
Center Differential Lock Motor Carrying Time Center differential lock motor energization time Min.: 0.0 sec
Max.: 127.5 sec
- -
H-L Shift Motor Output High-low shift motor output Stop, High to Low or Low to High Stop: High-low shift motor output
High to Low: Switching from H4 to L4
Low to High: Switching from L4 to H4
-
H-L Shift Motor Setting Duty High-low shift motor cycle Min.: 0%
Max.: 100%
- -
H-L Shift Motor Actual Current High-low shift motor actual current Min.: 0.0 A
Max.: 25.5 A
- -
H-L Shift Motor Carrying Status High-low shift motor energization status Carrying Stop, Carrying Setup, Carrying Start, Full Carrying, Torque Up, Carrying OFF, First Low Current, Low Current, High Current or Carrying End - -
H-L Shift Motor Carrying Time High-low shift motor energization time Min.: 0.0 sec
Max.: 127.5 sec
- -
Front Differential Lock Solenoid Setting Duty Front differential lock solenoid (No. 1 front differential case sub-assembly) cycle Min.: 0%
Max.: 100%
- w/ Front Differential Lock
Front Differential Lock Solenoid Actual Current Front differential lock solenoid (No. 1 front differential case sub-assembly) actual current Min.: 0.0 A
Max.: 25.5 A
- w/ Front Differential Lock
Front Differential Lock Solenoid Carrying Status Front differential lock solenoid (No. 1 front differential case sub-assembly) energization status Carrying Stop, Carrying Setup, Carrying Mediation, Full Carrying, Current Stability A, Current Increase, Current Stability B or Carrying End - w/ Front Differential Lock
Front Differential Lock Solenoid Carrying Time Front differential lock solenoid (No. 1 front differential case sub-assembly) energization time Min.: 0.0 sec
Max.: 127.5 sec
- w/ Front Differential Lock
Rear Differential Lock Solenoid Setting Duty Rear differential lock solenoid (electronic differential lock case sub-assembly) cycle Min.: 0%
Max.: 100%
- w/ Rear Differential Lock
Rear Differential Lock Solenoid Actual Current Rear differential lock solenoid (electronic differential lock case sub-assembly) actual current Min.: 0.0 A
Max.: 25.5 A
- w/ Rear Differential Lock
Rear Differential Lock Solenoid Carrying Status Rear differential lock solenoid (electronic differential lock case sub-assembly) energization status Carrying Stop, Carrying Setup, Carrying Mediation, Full Carrying, Current Stability A, Current Increase, Current Stability B or Carrying End - w/ Rear Differential Lock
Rear Differential Lock Solenoid Carrying Time Rear differential lock solenoid (electronic differential lock case sub-assembly) energization time Min.: 0.0 sec
Max.: 127.5 sec
- w/ Rear Differential Lock
Motor Circuit Controller 1 ECU internal motor circuit control element 1 status OFF or ON OFF: Transistor off
ON: Transistor on
Refer to the P17A811 wiring diagram for position of transistor.
Motor Circuit Controller 2 ECU internal motor circuit control element 2 status OFF or ON OFF: Transistor off
ON: Transistor on
Refer to the P17A811 wiring diagram for position of transistor.
Motor Circuit Controller 3 ECU internal motor circuit control element 3 status OFF or ON OFF: Transistor off
ON: Transistor on
Refer to the P17A811 wiring diagram for position of transistor.
Motor Circuit Controller 4 ECU internal motor circuit control element 4 status OFF or ON OFF: Transistor off
ON: Transistor on
Refer to the P17A811 wiring diagram for position of transistor.
Motor Circuit Controller 5 ECU internal motor circuit control element 5 status OFF or ON OFF: Transistor off
ON: Transistor on
Refer to the P17A811 wiring diagram for position of transistor.
Motor Circuit Controller 6 ECU internal motor circuit control element 6 status OFF or ON OFF: Transistor off
ON: Transistor on
Refer to the P17A811 wiring diagram for position of transistor.
Solenoid Circuit Controller 11 ECU internal solenoid circuit control element 11 status OFF or ON OFF: Transistor off
ON: Transistor on
-
Solenoid Circuit Controller 12 ECU internal solenoid circuit control element 12 status OFF or ON OFF: Transistor off
ON: Transistor on
-
Solenoid Circuit Controller 13 ECU internal solenoid circuit control element 13 status OFF or ON OFF: Transistor off
ON: Transistor on
-
Solenoid Circuit Controller 14 ECU internal solenoid circuit control element 14 status OFF or ON OFF: Transistor off
ON: Transistor on
-


CLEAR FREEZE FRAME DATA


NOTICE:

Clearing the DTCs will also clear the Freeze Frame Data.


a.

Clear the DTCs and Freeze Frame Data.

Powertrain > Four Wheel Drive > Clear DTCs
50002 442