DESCRIPTION
Vehicle Control History is a function that captures and stores ECU data when triggered by specific vehicle behavior.
It may be possible to determine the cause of the malfunction by checking the vehicle history information and freeze frame data.
The number of possible stored Freeze Frame Data sets, whether multi Freeze Frame Data is available, the number of freeze frame points, Freeze Frame Data items, the ECU internal range, etc., is different depending on the stored group.
The stored data items for Vehicle Control History Freeze Frame Data are different depending on the stored group. When the value of a data item does not change across all points, only the value of the detection point will be displayed. The content of the Freeze Frame Data is almost the same as that of the Data List.
Click hereDrivetrain>JF2BM (TRANSFER / 4WD / AWD)>TRANSFER SYSTEM>DATA LIST / ACTIVE TEST
PRECAUTIONS
As Vehicle Control History may be overwritten whenever the trigger conditions are met, make sure to save Vehicle Control History before performing any inspections.
As Vehicle Control History may be stored when performing an Active Test, learning, etc., make sure to clear the Vehicle Control History before returning the vehicle to the customer.
CHECK VEHICLE CONTROL HISTORY
Using the GTS, check the vehicle control history (RoB).
| Tester Display |
|---|
| Vehicle Control History (RoB) |
CLEAR VEHICLE CONTROL HISTORY
Using the GTS, display the vehicle control history (RoB).
| Tester Display |
|---|
| Vehicle Control History (RoB) |
Select the clear button and follow the instructions on the screen to clear the vehicle control history.
When the vehicle control history is cleared, all the stored history items are cleared.