| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from |
|---|---|---|---|---|
| U010187 | Lost Communication with TCM Missing Message |
Diagnosis Condition:
·
Ignition switch ON
Malfunction Status:
·
except 1GR-FE:
-
Communication is lost between transmission control ECU assembly and 4 wheel drive control ECU
·
for 1GR-FE:
-
Communication is lost between ECM and 4 wheel drive control ECU
Malfunction Time:
·
5 seconds or more
Number of Trips:
·
1 trip |
CAN communication system | Four Wheel Drive |
| U012987 | Lost Communication with Brake System Control Module "A" Missing Message |
Diagnosis Condition:
·
Ignition switch ON
Malfunction Status:
·
Communication is lost between No. 2 skid control ECU (brake actuator assembly) and 4 wheel drive control ECU
Malfunction Time:
·
3.2 seconds or more
Number of Trips:
·
1 trip |
CAN communication system | Four Wheel Drive |
Turn the ignition switch to ON.
Clear the DTCs.
Turn the ignition switch off.
| Proceed to |
|---|
| NEXT |
NEXT
Turn the ignition switch to ON.
Check for DTCs.
| Result | Proceed to |
|---|---|
| DTCs are output | A |
| DTCs are not output | B |
Turn the ignition switch off.
A
Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING
B
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING