DATA LIST
In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Read the Data List according to the display on the GTS.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Driver Buckle Switch | Driver side seat belt buckle switch status | Fastened or Not Fastened | Fastened: Driver side seat belt fastened Not Fastened: Driver side seat belt not fastened |
- |
| 3rd Right Seat Buckle / Occupant Detection Warning Switch | Rear No. 2 RH seat belt buckle switch status | OFF or ON | OFF: Rear No. 2 RH seat belt fastened ON: Rear No. 2 RH seat belt not fastened |
- |
| 3rd Left Seat Buckle / Occupant Detection Warning Switch | Rear No. 2 LH seat belt buckle switch status | OFF or ON | OFF: Rear No. 2 LH seat belt fastened ON: Rear No. 2 LH seat belt not fastened |
- |
| Driver Seatbelt Warning Buzzer Function | Driver side seat belt warning buzzer setting status | ON or OFF | Customize setting displayed | - |
| Passenger Seatbelt Warning Buzzer Function | Passenger side seat belt warning buzzer setting status | ON or OFF | Customize setting displayed | - |
| Rear Right Seatbelt Warning Buzzer Function | Rear RH seat belt warning buzzer setting status*1 | ON or OFF | Customize setting displayed | - |
| Rear Left Seatbelt Warning Buzzer Function | Rear LH seat belt warning buzzer setting status*1 | ON or OFF | Customize setting displayed | - |
| Rear Center Seatbelt Warning Buzzer Function | Rear center seat belt warning buzzer setting status*1 | ON or OFF | Customize setting displayed | - |
| 3rd Right Seatbelt Warning Buzzer Function | Rear No. 2 RH seat belt warning buzzer setting status*2 | ON or OFF | Customize setting displayed | - |
| 3rd Left Seatbelt Warning Buzzer Function | Rear No. 2 LH seat belt warning buzzer setting status*2 | ON or OFF | Customize setting displayed | - |
*1: w/ Rear Seat Belt Warning
*2: w/ Rear No. 2 Seat Belt Warning
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Passenger Seat Buckle Switch Status | Front passenger side seat belt buckle switch status | Set, Unset or Unknown | Set: Front passenger side seat belt fastened Unset: Front passenger side seat belt not fastened Unknown: Data is not determined |
- |
| Passenger Seat Occupant Sensor Status | Passenger seat occupant detection sensor status | OFF, ON or Unknown | OFF: Front passenger seat not occupied ON: Front passenger seat occupied Unknown: Data is not determined |
- |
| Rear Seat RH Buckle Switch Status | Rear RH seat belt buckle switch status* | Set, Unset or Unknown | Set: Rear RH seat belt fastened Unset: Rear RH seat belt not fastened Unknown: Data is not determined |
- |
| Rear Seat Center Buckle Switch Status | Rear center seat belt buckle switch status* | Set, Unset or Unknown | Set: Rear center seat belt fastened Unset: Rear center seat belt not fastened Unknown: Data is not determined |
- |
| Rear Seat LH Buckle Switch Status | Rear LH seat belt buckle switch status* | Set, Unset or Unknown | Set: Rear LH seat belt fastened Unset: Rear LH seat belt not fastened Unknown: Data is not determined |
- |
*: w/ Rear Seat Belt Warning
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| RR Door Courtesy Switch Status | Rear door courtesy light switch RH signal* | OFF or ON | OFF: Rear door RH closed ON: Rear door RH open |
- |
| RL Door Courtesy Switch Status | Rear door courtesy light switch LH signal* | OFF or ON | OFF: Rear door LH closed ON: Rear door LH open |
- |
*: w/ Rear Seat Belt Warning
ACTIVE TEST
Using the GTS, perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Perform the Active Test according to the display on the GTS.
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Driver Side Seat Belt Warning | Front seat belt warning light | ON or OFF | - |