| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| U010087 | Lost Communication with ECM/PCM "A" Missing Message | Communication stop occurs between the combination meter assembly and ECM continuously for approximately 3.6 seconds or more. |
·
ECM
·
CAN communication system
·
Combination meter assembly |
| U011487 | Lost Communication with Four-Wheel Drive Clutch Control Module Missing Message | Communication stop occurs between the combination meter assembly and 4 wheel drive control ECU continuously for approximately 5 seconds or more. |
·
4 wheel drive control ECU
·
CAN communication system
·
Combination meter assembly |
| U012687 | Lost Communication with Steering Angle Sensor Module Missing Message | Communication stop occurs between the combination meter assembly and steering sensor continuously for approximately 3.6 seconds or more. |
·
Steering sensor
·
CAN communication system
·
Combination meter assembly |
| U012787 | Lost Communication with Tire Pressure Monitor Module Missing Message | Communication stop occurs between the combination meter assembly and tire pressure warning ECU and receiver continuously for 5 seconds or more. |
·
Tire pressure warning ECU and receiver
·
CAN communication system
·
Combination meter assembly |
| U012987 | Lost Communication with Brake System Control Module Missing Message | Either of the following conditions is met:
·
Communication stop occurs between the combination meter assembly and brake actuator assembly (No. 2 skid control ECU) continuously for 1 second or more.
·
Communication stop occurs between the combination meter assembly and brake actuator assembly (No. 2 skid control ECU) continuously for approximately 3.6 seconds or more. |
·
Brake actuator assembly (No. 2 skid control ECU)
·
CAN communication system
·
Combination meter assembly |
| U013187 | Lost Communication with Power Steering Control Module Missing Message | Communication stop occurs between the combination meter assembly and power steering ECU assembly continuously for approximately 3.6 seconds or more. |
·
Power steering ECU assembly
·
CAN communication system
·
Combination meter assembly |
| U013287 | Lost Communication with Suspension Control Module "A" Missing Message | Communication stop occurs between the combination meter assembly and absorber control ECU continuously for 10 seconds or more. |
·
Absorber control ECU
·
CAN communication system
·
Combination meter assembly |
| U014087 | Lost Communication with Body Control Module Missing Message | Communication stop occurs between the combination meter assembly and main body ECU (multiplex network body ECU) continuously for 5 seconds or more. |
·
Main body ECU (multiplex network body ECU)
·
CAN communication system
·
Combination meter assembly |
| U015187 | Lost Communication with Restraints Control Module Missing Message | Communication stop occurs between the combination meter assembly and airbag ECU assembly continuously for 5 seconds or more. |
·
Airbag ECU assembly
·
CAN communication system
·
Combination meter assembly |
| U016387 | Lost Communication with Navigation Control Module Missing Message | Communication stop occurs between the combination meter assembly and radio and display receiver assembly continuously for 5 seconds or more. |
·
Radio and display receiver assembly (for radio and display type)
·
Radio receiver assembly (for radio receiver type, with multi-display)
·
CAN communication system
·
Combination meter assembly |
| U016487 | Lost Communication with HVAC Control Module Missing Message | Communication stop occurs between the combination meter assembly and air conditioning amplifier assembly continuously for 5 seconds or more. |
·
Air conditioning amplifier assembly
·
CAN communication system
·
Combination meter assembly |
| U016887 | Lost Communication with Vehicle Security Control Module Missing Message | Communication stop occurs between the combination meter assembly and certification ECU (smart key ECU assembly) continuously for 5 seconds or more. |
·
Certification ECU (smart key ECU assembly)
·
CAN communication system
·
Combination meter assembly |
| U018287 | Lost Communication with Lighting Control Module Front Missing Message | Communication stop occurs between the combination meter assembly and headlight ECU sub-assembly LH continuously for 5 seconds or more. |
·
Headlight ECU sub-assembly LH
·
CAN communication system
·
Combination meter assembly |
| U023087 | Lost Communication with Rear Gate Module Missing Message | Communication stop occurs between the combination meter assembly and multiplex network door ECU continuously for 5 seconds or more. |
·
Multiplex network door ECU
·
CAN communication system
·
Combination meter assembly |
| U023387 | Lost Communication with Side Obstacle Detection Control Module "B" Missing Message | Communication stop occurs between the combination meter assembly and blind spot monitor sensor LH continuously for 5 seconds or more. |
·
Blind spot monitor sensor LH
·
CAN communication system
·
Combination meter assembly |
| U023A87 | Lost Communication with Image Processing Module "A" Missing Message | Communication stop occurs between the combination meter assembly and forward recognition camera continuously for 5 seconds or more. |
·
Forward recognition camera
·
CAN communication system
·
Combination meter assembly |
| U110087 | Lost Communication with Seat Belt Control Module Missing Message | Communication stop occurs between the combination meter assembly and seat belt control ECU for 5 seconds or more. |
·
Seat belt control ECU
·
CAN communication system
·
Combination meter assembly |
| U110387 | Lost Communication with Stop and Start Control Module Missing Message | Communication stop occurs between the combination meter assembly and the engine stop and start ECU continuously for 5 seconds or more. |
·
Engine stop and start ECU
·
CAN communication system
·
Combination meter assembly |
| U110687 | Lost Communication with Electric Parking Brake Module Missing Message | Communication stop occurs between the combination meter assembly and brake actuator assembly (No. 2 skid control ECU) continuously for approximately 4 seconds or more. |
·
Brake actuator assembly (No. 2 skid control ECU)
·
CAN communication system
·
Combination meter assembly |
| U111087 | Lost Communication with Clearance Sonar Module Missing Message | Communication stop occurs between the combination meter assembly and clearance warning ECU assembly continuously for 5 seconds or more. |
·
Clearance warning ECU assembly
·
CAN communication system
·
Combination meter assembly |
| U111287 | Lost Communication with Combination Switch Module Missing Message | Communication stop occurs between the combination meter assembly and steering sensor continuously for 10 seconds or more. |
·
Steering sensor
·
CAN communication system
·
Combination meter assembly |
| U113387 | Lost Communication with PMN Module Missing Message | Communication stop occurs between the combination meter assembly and certification ECU (smart key ECU assembly) continuously for approximately 3.6 seconds or more. |
·
Certification ECU (smart key ECU assembly)
·
CAN communication system
·
Combination meter assembly |
Clear the DTCs.
Check for DTCs.
CAN communication system DTCs are not output.
| Proceed to |
|---|
| OK |
| NG |
OK
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
NG
Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING