Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENTRY AND START SYSTEM (for Start Function)
RM38G0E _58 Vehicle Interior _100610 THEFT DETERRENT / KEYLESS ENTRY _0467507 ENTRY AND START SYSTEM(for Start Function) W

THEFT DETERRENT / KEYLESS ENTRY  ENTRY AND START SYSTEM(for Start Function)  CUSTOMIZE PARAMETERS  


CUSTOMIZE ENTRY AND START SYSTEM (for Start Function)


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Record the current settings before customizing.



HINT:

The following items can be customized.






CUSTOMIZE FINGERPRINT AUTHENTICATION SYSTEM (w/ Fingerprint Authentication)


NOTICE:
·

Fingerprint information must be registered for at least 1 finger, in order to switch the fingerprint authentication system on/off.

·

Fingerprint authentication customization can be performed from the multi-information display.

·

To switch the fingerprint authentication system on/off, the fingerprint user must successfully perform fingerprint authentication and the ignition switch must be turned to ON.

·

.If performing fingerprint authentication cannot be successfully performed, touching the electrical key transmitter (electrical key) to the engine switch and turning the ignition switch to ON will allow for operation.

·

Fingerprint authentication customization will be automatically enabled when fingerprint information is first registered to the vehicle.

·

Fingerprint authentication customization will be automatically disabled if all fingerprint information is cleared.



a.

Select the setting tab and set the customize setting from the multi-information display screen.

Tester Display Measurement Item Default Setting Default Setting Control ECU
Fingerprint Authentication System Function Enable/disable the fingerprint authentication system No No/Yes Certification ECU (smart key ECU assembly)