Home › Power Source / Network › NETWORKING › CXPI COMMUNICATION SYSTEM
RM38G0E _57 Power Source / Network _100626 NETWORKING _0467513 CXPI COMMUNICATION SYSTEM U

NETWORKING  CXPI COMMUNICATION SYSTEM  DATA LIST / ACTIVE TEST  


READ DATA LIST


NOTICE:

In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


HINT:

Using the GTS to read the Data List allows values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.


a.

According to the display on the GTS, read the Data List.

Body Electrical > Main Body > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Communication Power Integration No.1 Connection status between semiconductor power integration ECU and main body ECU (multiplex network body ECU) OK or STOP OK: Connection
STOP: No connection
When there is a malfunction, a DTC is stored.
Communication Power Integration No.2 Connection status between No. 2 semiconductor power integration ECU and main body ECU (multiplex network body ECU) OK or STOP OK: Connection
STOP: No connection
This item is displayed but not used
Communication Power Integration No.3 Connection status between No. 3 semiconductor power integration ECU and main body ECU (multiplex network body ECU) OK or STOP OK: Connection
STOP: No connection
This item is displayed but not used
Communication Power Distribution Box Connection status between power distribution box assembly and main body ECU (multiplex network body ECU) OK or STOP OK: Connection
STOP: No connection
When there is a malfunction, a DTC is stored.
Communication Wiper Module Connection status between windshield wiper relay assembly and main body ECU (multiplex network body ECU) OK or STOP OK: Connection
STOP: No connection
When there is a malfunction, a DTC is stored.
Communication Illumination Module "A" Connection status between illumination module and main body ECU (multiplex network body ECU) OK or STOP OK: Connection
STOP: No connection
This item is displayed but not used
Communication Illumination Module "B" Connection status between illumination module and main body ECU (multiplex network body ECU) OK or STOP OK: Connection
STOP: No connection
This item is displayed but not used
Communication LDM LH Connection status between headlight housing LH and main body ECU (multiplex network body ECU) OK or STOP OK: Connection
STOP: No connection
When there is a malfunction, a DTC is stored.
Communication LDM RH Connection status between headlight housing LH and main body ECU (multiplex network body ECU) OK or STOP OK: Connection
STOP: No connection
When there is a malfunction, a DTC is stored.