CUSTOMIZE FRONT POWER SEAT CONTROL SYSTEM (w/ Memory)
When the customer requests a change in a function, first make sure that the function can be customized.
Record the current settings before customizing.
The following items can be customized.
Customizing with the GTS
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Seat position/Tilt & Telesco memory recall setting | This customize function switches the condition of the seat position and Tilt & Telesco memory recall. Possible recall activation parameter "D-door unlock and open by smart system" or "Any door unlock and open with smart system". | Driver Door | $00:Driver Door,$01:All Doors | Main body ECU (multiplex network body ECU) |
| Driver Seat Distance Adjust when Get Off | Setting of seat slide distance for power easy access system. | Normal | $00:OFF,$01:Little,$02:Normal | Main body ECU (multiplex network body ECU) |
| Memory Call Function | Setting of memory call function. | Enable | $00:Disable,$01:Enable | Main body ECU (multiplex network body ECU) |
| Auto Operation Interference Avoidance Function | Setting of interference avoidance function for automatic operation. | ON | 0:ON,1:OFF | Position control ECU assembly |
Customizing with the multi-display
Turn the ignition switch to ON.
Enter the following menus: MENU / Setup / Vehicle / Vehicle Customization / Other Vehicle Settings.
Select the setting by referring to the table below.
| Display | Description | Default | Setting | Relevant ECU |
|---|---|---|---|---|
| Driver's seat Easy-Exit Slide | Allows customizing of the seat movement distance for the power seat power easy access system. | Full | Off / Partial / Full | Main body ECU (multiplex network body ECU) |