CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY
Disconnect the I33 air conditioning amplifier assembly connector.
Measure the voltage and resistance according to the value(s) in the table below.
| Terminal No. (Symbol) | Terminal Description | Condition | Specified Condition |
|---|---|---|---|
| I33-6 (IG+) - Body ground | IG power supply | Ignition switch ON | 11 to 14 V |
| Ignition switch off | Below 1 V | ||
| I33-17 (GND) - Body ground | Ground | Always | Below 1 Ω |
Reconnect the I33 air conditioning amplifier assembly connector.
Check for pulses according to the value(s) in the table below.
| Terminal No. (Symbol) | Terminal Description | Condition | Specified Condition |
|---|---|---|---|
|
*: w/ Rear Climate Control Seat |
|||
| I33-7 (LIN1) - Body ground | LIN communication line | Ignition switch ON | Pulse generation |
| I33-13 (ROUT) - Body ground | Front passenger side seat blower control signal |
·
Ignition switch ON
·
Front passenger side refreshing seat switch (seat blower switch) operate |
Pulse generation (See waveform) |
| I33-14 (LOUT) - Body ground | Driver side seat blower control signal |
·
Ignition switch ON
·
Driver side refreshing seat switch (seat blower switch) operate |
Pulse generation (See waveform) |
| I31-20 (RLIN) - Body ground | LIN communication line | Ignition switch ON | Pulse generation |
| I31-21 (SV2R) - Body ground* | Rear right side seat blower control signal |
·
Ignition switch ON
·
Rear right side refreshing seat switch (seat blower switch) operate |
Pulse generation (See waveform) |
| I31-22 (SV2L) - Body ground* | Rear left side seat blower control signal |
·
Ignition switch ON
·
Rear left side refreshing seat switch (seat blower switch) operate |
Pulse generation (See waveform) |
Waveform (Reference):
| Item | Content |
|---|---|
|
*: w/ Rear Climate Control Seat |
|
| Tester Connection |
·
I33-13 (ROUT) - Body ground
·
I33-14 (LOUT) - Body ground
·
I31-21 (SV2R) - Body ground*
·
I31-22 (SV2L) - Body ground* |
| Tool Setting | 1 V/DIV., 1 ms/DIV. |
| Vehicle Condition |
·
Ignition switch ON
·
Driver side refreshing seat switch (seat blower switch) operate
·
Front passenger side refreshing seat switch (seat blower switch) operate
·
Rear right side refreshing seat switch (seat blower switch) operate*
·
Rear left side refreshing seat switch (seat blower switch) operate* |
AIR CONDITIONING CONTROL ASSEMBLY
Disconnect the I78 air conditioning control assembly connector.
Measure the voltage and resistance according to the value(s) in the table below.
| Terminal No. (Symbol) | Terminal Description | Condition | Specified Condition |
|---|---|---|---|
| I78-4 (E) - Body ground | Ground | Always | Below 1 Ω |
| I78-8 (IG) - Body ground | IG power supply | Ignition switch ON | 11 to 14 V |
| Ignition switch off | Below 1 V | ||
| I78-16 (+B) - Body ground | Power source | Always | 11 to 14 V |
Reconnect the I78 air conditioning control assembly connector.
Check for pulses according to the value(s) in the table below.
| Terminal No. (Symbol) | Terminal Description | Condition | Specified Condition |
|---|---|---|---|
| I78-3 (LIN1) - Body ground | LIN communication line | Ignition switch ON | Pulse generation |
CHECK COOLER CONTROL SWITCH ASSEMBLY (w/ Rear Climate Control Seat)
Disconnect the Q52 cooler control switch assembly connector.
Measure the voltage and resistance according to the value(s) in the table below.
| Terminal No. (Symbol) | Terminal Description | Condition | Specified Condition |
|---|---|---|---|
| Q52-6 (E) - Body ground | Ground | Always | Below 1 Ω |
| Q52-10 (IG) - Body ground | IG power supply | Ignition switch ON | 11 to 14 V |
| Ignition switch off | Below 1 V |
Reconnect the Q52 cooler control switch assembly connector.
Check for pulses according to the value(s) in the table below.
| Terminal No. (Symbol) | Terminal Description | Condition | Specified Condition |
|---|---|---|---|
| Q52-5 (RLIN) - Body ground | LIN communication line | Ignition switch ON | Pulse generation |