Home › Vehicle Interior › SEAT › REAR POWER SEAT CONTROL SYSTEM
RM38G0E _58 Vehicle Interior _100628 SEAT _0467518 REAR POWER SEAT CONTROL SYSTEM D

SEAT  REAR POWER SEAT CONTROL SYSTEM  SYSTEM DESCRIPTION  


REAR POWER SEAT CONTROL SYSTEM DESCRIPTION


·

The rear No. 2 seats are equipped with a power folding system.

·

This system has the following functions: reclining, luggage room expansion, folding and return, and jam protection.

·

Both the left and right seats are equipped with this system. Each system operates independently.



FUNCTIONS OF MAIN COMPONENTS


Component Function
No. 2 Seatback Frame Sub-assembly
(Seatback Position Sensor)
The fold seat control ECU provides the voltage that is used to operate the reclining motor. The reclining motor reclines and returns the seatback of the rear No. 2 seat (a Hall-type position sensor is installed in the reclining motor to detect the seatback position).
No. 2 Rear Seat Leg Assembly
(Seat Cushion Position Sensor)
The fold seat control ECU provides the voltage that is used to operate the cushion motor. The cushion motor stows and returns the rear No. 2 seat (a Hall-type position sensor is installed in the cushion motor to detect the seat cushion position).
Rear Power Seat Switch Sends a seatback angle adjustment signal to the fold seat control ECU when this switch is operated. The seatback angle is adjusted based on this signal.
Fold Seat Switch Assembly Sends a rear No. 2 seat folding or return operation signal to the fold seat control ECU when this switch is operated. The rear No. 2 seat is folded or returned to the original position based on this signal.
Fold Seat Control ECU This ECU receives signals from each operation switch and drives the motor to perform storage, return and reclining of the seat. When the conditions required for operation are not fulfilled or when the system detects that something is interfering with the movement of the seat, this ECU sounds an internal alarm.