Home › Vehicle Interior › SEAT › REAR POWER SEAT CONTROL SYSTEM
RM38G0E _58 Vehicle Interior _100628 SEAT _0467518 REAR POWER SEAT CONTROL SYSTEM U

SEAT  REAR POWER SEAT CONTROL SYSTEM  TERMINALS OF ECU  


CHECK FOLD SEAT CONTROL ECU


B613127E01
4.26,0.229 4.563,0.427 0.302,0.198 4.938,0.219 5.24,0.417 0.302,0.198 1.813,0.26 2.115,0.458 0.302,0.198 2.823,0.25 3.125,0.448 0.302,0.198 4.354,0.26 4.646,0.563 0.292,0.302 10 false T7 5.021,0.24 5.313,0.542 0.292,0.302 10 false T8 1.865,0.271 2.156,0.573 0.292,0.302 10 false T9 2.885,0.26 3.177,0.563 0.292,0.302 10 false T5

a.

Disconnect the T7, T8 and T9 fold seat control ECU connectors.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No.
(Symbol)
Terminal Description Condition Specified Condition
T7-2 (+B2) - Body ground Power source (Battery) Always 11 to 14 V
T7-5 (GND2) - Body ground Ground Always Below 1 Ω
T9-7 (SYSG) - Body ground Ground Always Below 1 Ω
T8-10 (GND) - Body ground Ground Always Below 1 Ω
T9-5 (ECUB) - Body ground Power source (Battery) Always 11 to 14 V
T9-10 (IG) - Body ground Power source (IG) Ignition switch ON 11 to 14 V
Ignition switch off Below 1 V
T5-1 (RSSW) - Body ground Park/neutral position switch signal Ignition switch ON
Shift lever in P
11 to 14 V
Ignition switch ON
Shift lever not in P
Below 1 V
T8-1 (+B) - Body ground Power source (Battery) Always 11 to 14 V

If the result is not as specified, there may be a malfunction on the wire harness side.


c.

Reconnect the T7, T8 and T9 fold seat control ECU connectors.


d.

Measure the resistance, voltage and pulse according to the value(s) in the table below.

Terminal No.
(Symbol)
Terminal Description Condition Specified Condition
T7-1 (RCL+) - Body ground Reclining motor operation signal Rear power seat switch LH forward 11 to 14 V
T7-4 (RCL-) - Body ground Reclining motor operation signal Rear power seat switch LH backward 11 to 14 V
T7-3 (FLD+) - Body ground Cushion motor operation signal No. 1 or No. 2 fold seat switch LH fold 11 to 14 V
T7-6 (FLD-) - Body ground Cushion motor operation signal No. 1 or No. 2 fold seat switch LH return 11 to 14 V
T5-16 (FLD2) - Body ground No. 1 fold seat switch signal (Fold) No. 1 fold seat switch LH off 11 to 14 V
No. 1 fold seat switch LH fold Below 1 V
T5-19 (FLD3) - Body ground No. 1 fold seat switch signal (Fold) No. 1 fold seat switch LH off 11 to 14 V
No. 1 fold seat switch LH fold Below 1 V
T5-13 (RCLF) - Body ground Reclining forward switch signal Always 11 to 14 V
Rear power seat switch LH forward Below 1 V
T5-3 (RCLR) - Body ground Reclining backward switch signal Always 11 to 14 V
Rear power seat switch LH backward Below 1 V
T5-10 (RTN2) - Body ground No. 1 fold seat switch signal (Return) No. 1 fold seat switch LH off 11 to 14 V
No. 1 fold seat switch LH return Below 1 V
T5-9 (RTRN) - Body ground No. 2 fold seat switch signal (Return) No. 2 fold seat switch LH off 11 to 14 V
No. 2 fold seat switch LH return Below 1 V
T5-17 (FOLD) - Body ground No. 2 fold seat switch signal (Fold) No. 2 fold seat switch LH off 11 to 14 V
No. 2 fold seat switch LH fold Below 1 V
T6-11 (SFLD) - T6-12 (SG1) Folding position sensor signal Motor operating Pulse generation
T6-12 (SG1) - Body ground Folding position sensor ground Always Below 1 Ω
T8-2 (RCL+) - Body ground Reclining motor operation signal Rear power seat switch RH forward 11 to 14 V
T8-3 (RCL-) - Body ground Reclining motor operation signal Rear power seat switch RH backward 11 to 14 V
T8-6 (FLD+) - Body ground Cushion motor operation signal No. 1 or No. 2 fold seat switch RH fold 11 to 14 V
T8-7 (FLD-) - Body ground Cushion motor operation signal No. 1 or No. 2 fold seat switch RH return 11 to 14 V
T5-6 (FLD2) - Body ground No. 1 fold seat switch signal (Fold) No. 1 fold seat switch RH off 11 to 14 V
No. 1 fold seat switch RH fold Below 1 V
T5-14 (RCLF) - Body ground Reclining forward switch signal Always 11 to 14 V
Rear power seat switch RH forward Below 1 V
T5-4 (RCLR) - Body ground Reclining backward switch signal Always 11 to 14 V
Rear power seat switch RH backward Below 1 V
T5-20 (RTN2) - Body ground No. 1 fold seat switch signal (Return) No. 1 fold seat switch RH off 11 to 14 V
No. 1 fold seat switch RH return Below 1 V
T5-18 (FOLD) - Body ground No. 2 fold seat switch signal (Fold) No. 2 fold seat switch RH off 11 to 14 V
No. 2 fold seat switch RH fold Below 1 V

If the result is not as specified, the ECU may have a malfunction.