Check the following illustrations to determine the applicable system type before performing diagnosis.
| System Type | Instrument Panel Front View (Example) |
|---|---|
| Type A |
|
| Type B |
|
PRECAUTION FOR ACTIVE NOISE CONTROL SYSTEM
When replacing the telephone transceiver assembly, make sure to replace it with a new one.
*1: for 4 or 6 Speakers
*2: for 6 Speakers
If the active noise control microphone garnish hole is blocked, clean away the blockage and perform diagnosis.
If the front No. 1 speaker assembly, front No. 3 speaker assembly*1 or No. 1 speaker with box assembly*2 has been replaced with a third-party part, the following symptoms may occur.
Deteriorated performance in the active noise control system
Increased engine noise