Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENGINE HOOD COURTESY SWITCH
RM38G0E _58 Vehicle Interior _100610 THEFT DETERRENT / KEYLESS ENTRY _0467834 ENGINE HOOD COURTESY SWITCH G

THEFT DETERRENT / KEYLESS ENTRY  ENGINE HOOD COURTESY SWITCH  INSPECTION  


PROCEDURE

Hide 53510 1.INSPECT ENGINE HOOD COURTESY SWITCH (HOOD LOCK ASSEMBLY)

a.

for LHD:

i.
E462560C01
0.24,2.594 0.667,2.833 0.427,0.24 1.104,2.594 1.521,2.594 true 1.896,2.583 2.313,2.583 true 0.656,0.938 1.646,0.938 true 0.896,0.396 1.865,0.646 true 2.385,2.49 2.698,2.688 0.313,0.198 10 false E 0.708,0.281 1.021,0.479 0.313,0.198 10 false *b 0.333,2.625 0.792,2.823 0.458,0.198 10 false B36 0.25,2.156 0.563,2.354 0.313,0.198 12 false *c 0.979,2.51 1.292,2.708 0.313,0.198 10 false + 0.479,0.844 0.792,1.042 0.313,0.198 10 false *a
*a Closed
*b Open
*c Component without harness connected
(Engine Hood Courtesy Switch (Hood Lock Assembly))


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(B36)Location & Routing

Click Connector(B36)Engine Compartment>Engine Room Main Wire / Lamp Wire / No. 2 Engine Room Wire / No. 2 Lamp Wire / No. 3 Engine Room Wire / No. 6 Engine Room Wire / Washer Wiring Assembly>Hood Courtesy Switch (Hood Lock Assembly)

B36-1 (E) - B36-2 (+) Open 10 kΩ or higher
B36-1 (E) - B36-2 (+) Closed Below 1 Ω


If the result is not as specified, replace the engine hood courtesy switch (hood lock assembly).



b.

for RHD:

i.
E462561C02
0.271,2.531 0.656,2.74 0.385,0.208 1.667,0.635 2.344,0.385 true 1.896,0.927 2.667,0.865 true 1.896,2.583 2.427,2.583 true 0.99,2.573 1.521,2.573 true 2.719,0.76 3.031,0.958 0.313,0.198 10 false *a 2.385,0.229 2.698,0.427 0.313,0.198 10 false *b 0.24,2.167 0.552,2.365 0.313,0.198 12 false *c 0.344,2.563 0.802,2.76 0.458,0.198 10 false B36 2.49,2.5 2.646,2.698 0.156,0.198 10 false E 0.885,2.5 1.042,2.698 0.156,0.198 10 false +
*a Closed
*b Open
*c Component without harness connected
(Engine Hood Courtesy Switch (Hood Lock Assembly))


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(B36)Location & Routing

Click Connector(B36)Engine Compartment>Engine Room Main Wire / Lamp Wire / No. 2 Engine Room Wire / No. 2 Lamp Wire / No. 3 Engine Room Wire / No. 6 Engine Room Wire / Washer Wiring Assembly>Hood Courtesy Switch (Hood Lock Assembly)

B36-1 (E) - B36-2 (+) Open 10 kΩ or higher
B36-1 (E) - B36-2 (+) Closed Below 1 Ω


If the result is not as specified, replace the engine hood courtesy switch (hood lock assembly).