Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › SECURITY HORN ASSEMBLY
RM38G0E _58 Vehicle Interior _100610 THEFT DETERRENT / KEYLESS ENTRY _0467835 SECURITY HORN ASSEMBLY G

THEFT DETERRENT / KEYLESS ENTRY  SECURITY HORN ASSEMBLY  INSPECTION  


PROCEDURE

Hide 1.INSPECT SECURITY HORN ASSEMBLY

a.

Check the operation of the security horn assembly.

i.
E462555C02
1.552,0.094 1.948,0.292 0.396,0.198 0.99,0.542 1.229,0.542 1.229,0.542 1.594,1.115 true 0.063,0.052 0.438,0.292 0.375,0.24 10 false *b 0.74,0.427 0.958,0.667 0.219,0.24 10 false *a 1.646,0.115 1.969,0.313 0.323,0.198 10 false B34
*a Bracket
*b Component without harness connected
(Security Horn Assembly)


Apply battery voltage to the terminal 1 and bracket, and check that the horn sounds.

OK:
Tester Connection Specified Condition

Click Location & Routing(B34)Location & Routing

Click Connector(B34)Engine Compartment>Engine Room Main Wire / Lamp Wire / No. 2 Engine Room Wire / No. 2 Lamp Wire / No. 3 Engine Room Wire / No. 6 Engine Room Wire / Washer Wiring Assembly>Security Horn Assembly

B34-1 - Battery positive (+)
Security horn assembly bracket - Battery negative (-)
Security horn assembly sounds


If the result is not as specified, replace the security horn assembly.