81340 1.INSPECT VANITY LIGHT ASSEMBLY (for LH Side)
| *a | Component without harness connected (Vanity Light Assembly) |
Check the illumination.
Apply battery voltage to the vanity light assembly and check that the vanity light comes on.
| Tester Connection | Specified Condition |
|---|---|
Click Location & Routing(d9)Location & Routingewd_type=routing;type=c;code=d9 Click Connector(d9)Body>No. 1 Roof Wire>Vanity Light Assembly LHewd_type=component;type=c;code=d9;pinno=2,1 |
|
| d9-2 (B) → Battery positive (+) d9-1 (E) → Battery negative (-) |
Vanity light illuminates |
If the result is not as specified, replace the vanity light assembly.
81340 2.INSPECT VANITY LIGHT ASSEMBLY (for RH Side)
| *a | Component without harness connected (Vanity Light Assembly) |
Check the illumination.
Apply battery voltage to the vanity light assembly and check that the vanity light comes on.
| Tester Connection | Specified Condition |
|---|---|
Click Location & Routing(d8)Location & Routingewd_type=routing;type=c;code=d8 Click Connector(d8)Body>No. 1 Roof Wire>Vanity Light Assembly RHewd_type=component;type=c;code=d8;pinno=2,1 |
|
| d8-2 (B) - Battery positive (+) d8-1 (E) - Battery negative (-) |
Vanity light illuminates |
If the result is not as specified, replace the vanity light assembly.