81330 1.INSPECT NO. 1 LUGGAGE COMPERTMENT LIGHT ASSEMBLY
| *a | Component without harness connected (No. 1 Luggage Compartment Light Assembly) |
Check the illumination.
Apply battery voltage to the connector and check the light illumination condition.
| Tester Connection | Specified Condition |
|---|---|
Click Location & Routing(U3)Location & Routingewd_type=routing;type=c;code=U3 Click Connector(U3)Body>No. 2 Room Wire>No. 1 Luggage Compartment Light Assemblyewd_type=component;type=c;code=U3;pinno=2,1 |
|
| U3-2 (B) - Battery positive (+) U3-1 (L) - Battery negative (-) |
No. 1 luggage compartment light assembly illuminates |
If the result is not as specified, replace the No. 1 luggage compartment light assembly.