81230 1.INSPECT COURTESY LIGHT ASSEMBLY (for LH Side)
| *a | Component without harness connected (Courtesy Light Assembly) |
Check the illumination.
Apply battery voltage to the connector and check the light illumination condition.
| Tester Connection | Specified Condition |
|---|---|
Click Location & Routing(M12)Location & Routingewd_type=routing;type=c;code=M12 Click Connector(M12)Body>Front Door Wire RH>Front Courtesy Light Assembly RHewd_type=component;type=c;code=M12;pinno=2,1 |
|
| M12-2 (B) - Battery positive (+) M12-1 (SW) - Battery negative (-) |
Courtesy light assembly illuminates |
If the result is not as specified, replace the courtesy light assembly.
81230 2.INSPECT COURTESY LIGHT ASSEMBLY (for RH Side)
| *a | Component without harness connected (Courtesy Light Assembly) |
Check the illumination.
Apply battery voltage to the connector and check the light illumination condition.
| Tester Connection | Specified Condition |
|---|---|
Click Location & Routing(N10)Location & Routingewd_type=routing;type=c;code=N10 Click Connector(N10)Body>Front Door Wire LH>Front Courtesy Light Assembly LHewd_type=component;type=c;code=N10;pinno=2,1 |
|
| N10-2 (B) - Battery positive (+) N10-1 (SW) - Battery negative (-) |
Courtesy light assembly illuminates |
If the result is not as specified, replace the courtesy light assembly.