81230 1.INSPECT COURTESY LIGHT ASSEMBLY (for LH Side)
| *a | Component without harness connected (Courtesy Light Assembly) |
Check the illumination.
Apply battery voltage to the connector and check the light illumination condition.
| Tester Connection | Specified Condition |
|---|---|
Click Location & Routing(P7)Location & Routingewd_type=routing;type=c;code=P7 Click Connector(P7)Body>No. 2 Rear Door Wire>Rear Courtesy Light Assembly LHewd_type=component;type=c;code=P7;pinno=2,1 |
|
| P7-2 (B) - Battery positive (+) P7-1 (SW) - Battery negative (-) |
Courtesy light assembly illuminates |
If the result is not as specified, replace the courtesy light assembly.
81230 2.INSPECT COURTESY LIGHT ASSEMBLY (for RH Side)
| *a | Component without harness connected (Courtesy Light Assembly) |
Check the illumination.
Apply battery voltage to the connector and check the light illumination condition.
| Tester Connection | Specified Condition |
|---|---|
Click Location & Routing(O7)Location & Routingewd_type=routing;type=c;code=O7 Click Connector(O7)Body>No. 1 Rear Door Wire>Rear Courtesy Light Assembly RHewd_type=component;type=c;code=O7;pinno=2,1 |
|
| O7-2 (B) - Battery positive (+) O7-1 (SW) - Battery negative (-) |
Courtesy light assembly illuminates |
If the result is not as specified, replace the courtesy light assembly.