81080J 1.INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY
| *a | Component without harness connected (No. 1 Interior Illumination Light Assembly) |
Check the illumination.
Apply battery voltage to the connector and check the light illumination condition.
| Tester Connection | Specified Condition |
|---|---|
Click Location & Routing(I63)Location & Routingewd_type=routing;type=c;code=I63 |
|
| I63-2 (B) - Battery positive (+) I63-1 (L) - Battery negative (-) |
No. 1 interior illumination light assembly illuminates |
If the result is not as specified, replace the No. 1 interior illumination light assembly.